water purifier for biochemical analysis(RO system)

Product Introduction

The Raw Water Requirements and Working Conditions:
1. Ambient temperature: 5 ~ 40 centigrade
2. Relative humidity: ≤ 80%
3. Raw water pressure: ≥ 0.1Mpa
4. Raw water temperature: 15 ~ 35 centigrade
5. Raw water flow rate: ≥ 1.5L/min
6. Total solid content: ≤ 200ppm
7. Volume index of raw water sedimentation: SDI <5
8. Chlorine: ≤ 0.01
9. Power voltage: AC220V,50Hz




The Technical Parameters:
1. Water supply pressure: 0.15Mpa ~ 0.35Mpa
2. RO operating pressure: 0.6Mpa ~ 1.0Mpa
3. Reverse osmosis desalination rate: ≥ 95%
4. Raw water recovery: ≥ 35%
5. Water production rate: 20L/H,40L/H,80L/H,120L/H,250L/H
6. Water resistivity: ≥ 10MΩ-CM
7. Water quality was conformed to laboratory GB6682-2000 standard
8. Reverse osmosis water device complies GB/T19249-2003 standard
9. Machine size (cm): L * W * H = 50 * 32 * 50




The Device Features:
1. Directly making ultrapure water with tap water
2. Using well-known brand instruments,with online real-time accurate analysis,to display water quality
3. using well-known brands pumps,reverse osmosis membrane and resin and other high quality materials to ensure superior performance of equipment
4. Automatic operating system,practical and convenient
5. Little occupation of space,simple and beautiful

Supporting the use of laboratory chemistry analyzer,suitable for most of the domestic biochemical analyzers and some of the imported biochemical analyzers whose test rate are under 400.