waste eps foam cold compactor machine

Due to the lack of active investment in compressors and the need for logistics systems, most polystyrene products are currently not recycled. Because the density of polystyrene foam is relatively low, it can not be well collected. However, if the scrap material passes through the initial compaction process, the material density will usually change from 30 kg/m3 to 330 kg/m3, which will become high quality recyclable plastic particles. The CF polystyrene foam compressor can well compress polystyrene foam, which provides great convenience for the recovery work.
The joint crown EPS foam cold press is used to solve this problem. It can reduce the size of EPS foam material, and the compression ratio can reach 1:30-1: 50. The compression product is EPS foam plastic block with a density of 350 kg/m3. It is easy to treat EPS foam plastic material into another recycling form.
The EPS foam compressor is mainly used to treat waste paper, EPS foam (polypropylene foam), EPE and so on.
Through the continuous improvement of the EPS foam compressor, it has achieved a superior performance. EPS foam compressor is based on PLC automatic control system and peripheral circuit control, the performance is quite stable.
First, the volume of the material is reduced by the filter screen on the crusher and the compressor, and then the material will fall onto the screw. The main motor will push the material forward through the screw. Meanwhile, the hydraulic system of the die head will be closed to compress the EPS foam material. The material will become lump, and the volume will be reduced by 30 to 50 times, and it will be easier to carry and transport. All parts of the machine are made up of one machine, which saves cost, energy consumption and space. These EPS bubbles can be broken into smaller volumes again.
The CP380 EPS polystyrene foam compressor is a large-sized model of all the cold presses of the company.This type of cold press is suitable for supermarkets, small seafood markets, schools and hospitals. It can improve the efficiency of recycling. Customers usually compress the EPS foam block into 380mmX380mm size.