sungold power 2000W Peak 6000W DC24V Pure Sine Wave Inverter With Charger 30AMP LCD Screen

It features a built-in multi-state charger to ensure batteries are recharged safely and efficiently as well as an integrated 30A transfer switch with supplementary breaker. This provides for a smooth transition between shore power and battery power, while the automatic AC load sensing feature will prevent tripping the shore power circuit breaker. Its efficient design and compact dimensions allow for installation in a variety of locations and the detachable digital display can be mounted anywhere for convenient remote control.It is ideal for operating motor loads and reducing stress on surge protection circuitry, meaning potentially longer equipment life. Perfect for small microwave ovens, computers, televisions, power tools and more.

Feature

Soft start capability for starting heavy loads
Available in 1000 and 6000 watt models Utility grade, sine wave power
Durable construction for long life under extreme environmental conditions
70 amp automatic three-stage battery charger (bulk, absorption, and float)
Battery equalization with remote temperature sensor for increased performance
Low idle current (less than 1 watt) conserves energy when no loads are present
Built-in starting control circuits for two- and three-wire generator starting systems
Better thermal performance allows full output power to 40°C without de-rating
High surge capacity starts more difficult loads and handles overload conditions reliably
Simplified controls with a snap-on cover that protects settings from being accidentally changed
Pure copper transformer inside and pure copper DC terminal port outside.


Specification

Nominal Power：3000W
Peak Power: 9000W
AC output: AC110V/120V or AC220V/230V/240V
Phase & waveform: Single phase & sine wave
Acceptable Voltage: 95-127VAC or 194-243VAC(wide mode）
Line Low Transfer: 85V±4% or 184(154 wide mode±4%)
Line Low Return: 95V±4% or 194(164 wide mode±4%)
Line high Transfer: 135V±4% or 253±4%
Line high Return: 127V±4% or 243±4%
Frequency: 50Hz or 60Hz (auto sensing)
Line Low Transfer: 47Hz for 50Hz,57Hz for 60Hz
Line high Transfer: 55Hz for 50Hz,65Hz for 60Hz
Phase & waveform：Single phase & sinewave（bypass mode sync to input）
Voltage Regulation： ±10%rms（bypass mode sync to input）
Frequency：50Hz±0.3Hz（bypass mode sync to input）
Crest Power：3 times of ratings
Short Circuit Protection：Yes, shutdown after 10 minutes
Power Factor：0.9-1.0
Battery Voltage： 12V/24V/48V
Minimum Start Voltage: 10V/20V/40V
Low Battery Alarm: 10.5V/21V/42V
Low Battery Transfer: 10V/20V/40V
High Voltage Alarm: 16V/32V/64V
Max Charging Current: 75A/45A/30A
Over Charge Voltage: 15.7V/31.4V/62.8V
Transfer Efficiency: line Mode＞95% Battery Mode ＞88%
power saver: Available when the load is less than 25 Watts
Indicators:
7-LED Display
From the right to the left,LED1 line mode (green lighting)、LED2 inverter mode
(green lighting)、LED3 charging mode（yellow lighting）、LED4 Fully charged
(green lighting)、LED5 over heat shutdown(red lighting）、LED6 Overloaded
shutdown（red lighting）、LED7 Saving Mode（green lighting）
3-LED Display
Charging Mode(green lighting)、inverter mode(green lighting)、Alarm（red lighting）
Switch selector:
Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is turning the inverter off.
Audible Alarm:
Sounding when the heatsink's tem is over 105℃ and shutdown after 30 seconds.
Protections:
low battery、over charging、over temp、over load
Operating Environment: 0-40℃,0-90%RH(non-condensing)
Audible Noise: ＜60dB
Size: 442mm*218mm*179mm
Net Weight (KG): 28Kg