sun gold power 600W Wind Charge Controller For 12V Wind Turbine Generator

Wind Charge Controller and Diversion Regulator Our charge controller will automatically disconnect your wind generator from your batteries when they are full and switch it to another load. This allows you to fully charge your batteries and then make use of the extra power. This form of regulation is required for wind turbines to always keep a load on the generator to prevent over-speeding. This microprocessor controlled charge/diversion regulator offers two charging modes, cycling mode for frequent use and non-cycling for stand-by power. Charging and discharging voltage levels can be default or user set. An optional fan may be connected that will be switched on while charging to remove any explosive gas from the battery enclosure. A relay protection feature prevents rapid, destructive switching of the relay. A heavy load setting bypasses cycling and the relay protection feature to allow quick response to accomodate heavy loads.



Feature
 High quality technical components guarantee its stability and reliability
 This charger is designed with a sound protection system
 Anti-water, anti-dust shell makes it applicable in various outdoor environment
 Voltage/current control charging make sure storage batteries are always at the best state of charge.
 MPPT charging effectively collects power from generator to charge storage batteries.
 Using PWM to unload redundant electrical energy, thus to protect batteries and make sure safety of generator
 It give preference to wind power supply, when wind power is not enough, it can switch to utility power supply if needed.
 The body shell using aluminum alloy make it light and good heat dissipation.

Specification

Model: SG-W600
Rated voltage（V）: 12V
Rated current of wind-generator(A): 37A
Battery over discharge protection voltage: 10.5V
Battery over discharge recovery voltage : 11.5V
Final charge voltage(V): 14.4V
Floating voltage(V): 13V
Recover time of braking: 30min
Allowable ambient temperature (℃): －20～40
Dimension(mm): 208x140x74
Weight(g): 1500g