sun gold power 6000W Peak 12000W Split Phase 120V 240V Pure Sine Wave Inverter Charger 50A 48V

It features a built-in multi-state charger to ensure batteries are recharged safely and efficiently as well as an integrated 30A transfer switch with supplementary breaker. This provides for a smooth transition between shore power and battery power, while the automatic AC load sensing feature will prevent tripping the shore power circuit breaker. Its efficient design and compact dimensions allow for installation in a variety of locations and the detachable digital display can be mounted anywhere for convenient remote control.It is ideal for operating motor loads and reducing stress on surge protection circuitry, meaning potentially longer equipment life. Perfect for small microwave ovens, computers, televisions, power tools and more.


Feature

Sine wave output to run motor loads and sensitive electronics
Multi-stage charger to charge deep cycle batteries quickly and efficiently
Integrated transfer switch allows seamless switching from shore power to battery power
Automatic AC load sensing to prevent tripping the shore power breaker
High frequency design results in compact sizes for easy storage
Detachable digital display
Dual GFCI outlet for safe operation
Built in USB port for charging USB devices
Heavy-duty stud connectors
Thermally activated cooling fans
Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown


Specification

Nominal Power： 6000W
Peak Power: 18000W
AC input: 220VAC or 240VAC
AC output: AC110V and AC 220V or AC120V and AC 240V
Phase & waveform: Single phase & sine wave
Acceptable Voltage: 95-127VAC or 194-243VAC(wide mode）
Line Low Transfer: 85V±4% or 184(154 wide mode±4%)
Line Low Return: 95V±4% or 194(164 wide mode±4%)
Line high Transfer: 135V±4% or 253±4%
Line high Return: 127V±4% or 243±4%
Frequency: 50Hz or 60Hz (auto sensing)
Line Low Transfer: 47Hz for 50Hz,57Hz for 60Hz
Line high Transfer: 55Hz for 50Hz,65Hz for 60Hz
Phase & waveform：Single phase & sinewave（bypass mode sync to input）
Voltage Regulation： ±10%rms（bypass mode sync to input）
Frequency：50Hz±0.3Hz（bypass mode sync to input）
Crest Power：3 times of ratings
Short Circuit Protection：Yes, shutdown after 10 minutes
Power Factor：0.9-1.0
Battery Voltage：24v / 48v
Minimum Start Voltage: 20V / 40V
Low Battery Alarm: 21V / 42V
Low Battery Transfer: 20V / 40V
High Voltage Alarm: 32V / 64V
Max Charging Current: 75A OR 50A
Over Charge Voltage: 31.4V / 62.8V
Transfer Efficiency: line Mode＞95% Battery Mode ＞88%
power saver: Available when the load is less than 25 Watts
Indicators:
7-LED Display
From the right to the left,LED1 line mode (green lighting)、LED2 inverter mode
(green lighting)、LED3 charging mode（yellow lighting）、LED4 Fully charged
(green lighting)、LED5 over heat shutdown(red lighting）、LED6 Overloaded
shutdown（red lighting）、LED7 Saving Mode（green lighting）
3-LED Display
Charging Mode(green lighting)、inverter mode(green lighting)、Alarm（red lighting）
Switch selector:
Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is turning the inverter off.
Audible Alarm:
Sounding when the heatsink's tem is over 105℃ and shutdown after 30 seconds.
Protections:
low battery、over charging、over temp、over load
Operating Environment: 0-40℃,0-90%RH(non-condensing)
Audible Noise: ＜60dB
Size: 598mm*218mm*179mm
Net Weight (KG): 48kg