scorch and sublimation color fastness tester

Scorch Tester (Sublimation Fastness tester), to determine fabrics Ironing color fastness and sublimation color fastness, and dimensional stability under hot dry conditions.

Heating plate temperature and test time are adjustable, fitted with microprocessor temperature controller and the top plate with precisely controlled weight. The independent heating plate ensures controlling test temperature and thickness of sample individually.


Sublimation Fastness Tester is suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test, disperse dyes sublimation color fastness test, reactive dye fastness test.
resistant ironing, or sublimation color fastness tester can test the fabric in hot, dry heat treatment of the dimensional stability;
Sublimation Fastness Tester can also test the fabric sublimation color fastness. Sample is placed between the upper and lower heating plate, the upper and lower heating plate temperature is accurately controlled by a separate controller, the heating plate spacing, the weight of the test piece controllable.
Test the temperature range of 120-230 ℃, with regular alarm function, accurate control of the sample time.

Technical Parameters
A, the hot plate for test: Size W100 × D40mm aluminum material (the same from top to bottom)
B, temperature regulation: digital temperature controller, the minimum display 1 ® C (upper and lower one)
C, the timing timer, audible alarm function
D, maximum temperature: 250 ® C
E, hot plate surface pressure: 4 ¯ 1 KPa (40cm2)
F, Heater: Cartridge Heaters 100V 150W (upper and lower one)
G, outside size: about W250 x D300 x H230mm