rc ESC

RC ESC

Input voltage:DC 6-16.8V(2-4S Lixx)
BEC:5V 2amp
Running current:18A(Output: Continuous 18A, Burst 20A up to 10 Secs.)
Size: 26mm (L) * 26mm (W) * 7mm (H).
Weight: 18g.

Programmable Items:
1. Brake Setting¡ºEnabled / Disabled, default is Disabled
2. Battery Type¡ºLi-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd)¡«default is Li-xx.
3. Low Voltage Protection Mode(Cut-Off Mode)¡º Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.
4. Low Voltage Protection Threshold(Cut-Off Threshold)¡ºLow / Medium / High, default is Medium.
1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when ÿ¯Mediumÿ?cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V.
2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when ÿ¯Mediumÿ?cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3Vÿ?
5. Startup Mode¡ºNormal /Soft /Super-Soft, default is Normal.
6. Timing¡ºLow / Medium / High, default is Low.