quartz 4 mhz

FE ATURE
- Typical 14.3 x 8.7 x 4.9 mm.
- Metal cover, FR-4 PCB based.
- Output: TTL/CMOS or Clipped Sine Wave.
- Low current option (2mA for Clipped Sine Wave o/p).
VCTCXO available.
T YPICAL APPLICATION
-Large-Scale equipment
-WLAN/WIMAX
-Mobile Phone
DIMENSION (mm) SOLDER PAD L AYOUT (mm)

ELECTRICAL SPECIFICATION
Parameter 5.0 V 3.3 V Unit
Min. Max. Min. Max.
Supply Voltage Variation (VDD) 5% 4.75 5.25 3.135 3.465 V
Frequency Range 5 40 5 40 MHz
Standard Frequency (for CMOS) 5, 6.4 ,8 , 8.192, 10, 12.5, 12.8, 16, 16.384, 19.44, 25
Standard Frequency (for Clipped Sine) 8.192, 10, 12.5, 12.8, 16, 16.384, 19.44, 25
Frequency Tolerance* - ±2.0 - ±2.0 ppm
Frequency Stability 　
Vs Supply Voltage (±5%) change (for CMOS) - ±0.3 - ±0.3 ppm
Vs Load (±10%) change _ ±0.2 _ ±0.2
Vs Aging (@1st year) _ ±1.0 _ ±1.0
Supply Current (CMOS output) _ 6 _ 6 mA
Supply Current (Clipped Sine Wave) _ 3.5 _ 3.5
Output Level (CMOS) Output High (Logic “1”) 90%VDD _ 90%VDD _ V
Output Low (Logic “0”) _ 10%VDD _ 10%VDD
Duty 45 55 45 55 %
Output Level (Clipped Sine Wave) 0.8 _ 0.8 _ Vp-p
Lead (CMOS) 15pF 15pF 　
Lead (Clipped Sine Wave) 10 KO // 10pF 10 KO // 10pF 　
Control Voltage Range (VCTCXO) 0.5 2.5 0.5 2.5 V
Pulling Range (VCTCXO) ±5.0 _ ±5.0 _ ppm
Vc Input Impedance (VCTCXO) 100 _ 100 _ KO
Phase Noise @ 12.8 MHz 100 Hz -120 -120 dBc/Hz
1 KHz -140 -140
10 KHz -148 -148
Start time _ 2 _ 2 mSec
Tri-State (option) Disable _ 0.3VDD _ 0.3VDD V
Enable 0.7VDD _ 0.7VDD _
Storage Temp. Range -55 125 -55 125 °C


Standard frequencies are frequencies which the crystal has been designed and does no imply a stock position
*Frequency at 250C, 1 hour after reflow
Packing:Tape & Reel 1000/3000pcs Reel

FREQ. STABILITY vs. TEMP. RANGE
ppm
Temp. (℃) ±0.05 ±0.1 ±0.14 ±0.2 ±0.28 ±0.37 ±0.5
0 ~ +55 O O O O O O O
-10 ~ +60 O O O O O O O
-20 ~ +70 △ O O O O O O
-40 ~ +85 × × × △ O O O
○: Available △:Conditional X: Not available
Specifications subject to change without notice.