mobile signal booster

Name: Band selective repeater
10-20dBm with software
CE Certified ROHS Certified
Built in antenna booster


1. CE ROHS certified
2. Integrated software system for local and remote monitoring and control
3. Built in server antenna for very quick installation
4. Industrial standard repeaters for cellular operators
5. ETSI & 3GPP 3GPP2 standards
6. Support any cellular devices (voice data video)
7. Alarm LED's for error detection
8. Manual gain control for UL and DL
9. UL & DL Automatic gain control
10. Auto shut down if oscillation is detected
11. Universal power range of 90V~265V
12. Very small size light weight and low power consumption
S10T~S20T is upgrade version of S10A~S20A. By keeping exactly the same size with that of S10A~S20A, we have successfully developed S10T~S20T with local / remote control and monitoring function. Local connection is USB port, while the remote connection is through GSM or GPRS modem, and the modem has already been integrated inside the repeater, and no additional device would be needed, and the communication method would either be SMS or GPRS. And Huaptec is ready to develop other communication method as per customer's request.Apart from the advanced integrated software, S10T~S20T has the same features with S10A~S20A, please kindly find below the details:



1.They have below recommended coverage sizes:



1) S10T: 100~800 square meters

2) S15T: 800~1500 square meters

3) S20T: 1000~2000 square meters.



2.The band selective repeater design to support any one relevant system of GSM850, GSM900, DCS, PCS; CDMA450, CDMA800, CDMA1900, CDMA2000,WCDMA2100 and AWS.



3.The repeater gets quite comprehensive functions:



1) Intermediate SAW filter technology for very sharp out of band rejection to amplify only specific operators' signals and reject all the others.



2) Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance



3) To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.



4) Auto shut off design available for both uplink and downlink to avoid serious interference to network effectively, when the repeater is in deep self-oscillation or very strong input power.



Repeater Kit available:



1. Repeater unit with power cord and adaptor.



2. External Panel 7dBi as donor antenna.



3. 15meter long 5D coax cable with loss of 3~5dB depending on different working frequencies (800~2500MHz).



4. Server antennas: built in antenna or indoor wide band omni ceiling antenna 3dBi gain, or indoor wide band panel antenna 7dBi gain.