manual mold silicon

Manual mold is a flowable liquid and the quality has nothing to do with the color. It consists of two components, Part A is a flwable liquid silicone rubber partB is the curing agent.Firstly,after your previous work of dealing with the original model, take some liquid silicone rubber, add 2%-3% curing agent of the amount of silicon and mix them evenly, Then after vacuum –pumping the mixture, you can pour it into the mold frame, The silicone mold will cures in 2-3hours.


FEATURES: Manual silicon good elasticity, non-deformation,high temperature resistance and low shrinkage.


BASICD ESCRIPTION: Manual mold is a flowable liquid and the quality has nothing to do with the color. It consists of two components, Part A is a flwable liquid silicone rubber partB is the curing agent.Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber, add 2%-3% curing agent of the amount of silicon and mix them evenly, Then after vacuum –pumping the mixture, you can pour it into the mold frame, The silicone mold will cures in 2-3hours.


FAQ for manual mold silicone:

How to deal with the bubbles during the mixing process?
It depends on your practical situation, Firstly you can deal the mixture with a vacuumizer if you have one, if no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%，Then in the prior period of the reaction of the mixture will be slower then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.
If you have further questions please feel free to contact Miss lanlam..


TEL:86-755-89948013 86-18218413661
FAX:89-755-89948030
E-mail:* Company website: www(dot)sellsilicone(dot)com
Address: Building A,No.3 Hongling First Road,Liulian Shibi ,Pingdi Street,LongGang District,Shenzhen,China.