iMod-93xx-EDGE - configurable ModBus device

iMod presents an innovational approach to telemetry and automation systems. iMod is a configurable ModBus device based on the efficient NPE hardware and system platform (linux).

Main features:
-developed communication and reporting channels

-datalogging function

-a variety of hardware interfaces

iMod does not require programming - it is a configurable device, which is very helpful during start-up of complex monitoring and control systems.

iMod can perform the following functions:

-I/O Access: digital input/output, analog input and other

-Datalogger with FTP/SQL/WWW access

-Reporting or alarm module (email, text messaging)

-ModBus gateway or ModBus proxy with buffering and an archiving option

-Autonomic controller with visualization and WWW control options

In a typical case, the iMod performs a specific sequence of tasks:

-downloading data from NPE interface or other outside devices using the Modbus, mBus, or other protocols

-buffering the gathered data with the option of its archivisation

-making data available for monitoring systems, such as SCADA type, or other iMod or PLC drivers, in polling form (pull-style) as well as event form (push-style)

more informations: */en/platform-imod-series-c-834_1933_107_1984.html

SPECIFICATION

CPU - ARM9 32-bit RISC CPU, 180 MHz, 200 MIPS

Memory on board - 64 MB SDRAM (max memory size 128 MB)

Flash memory - 16 MB (optional to 1GB)

Card reader - 1 x SD

System - Operating system - Linux v 2.6

RTC clock - RTC, SRAM 240 bytes, Watch Dog Timer

On Board LAN - 1 x Ethernet 10/100 Mbps (RJ45 connector); 1.5 KV magnetic isolation

Interface RS-232 - 2 x RS-232, built in protection 15 KV ESD

Interface RS-485 - 1 x RS-485, built in protection 15 KV ESD; Data bits: 5, 6, 7, 8, Stop bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark; Speed: 50 bps to 921.6 Kbps

LED signalling - system x 1, user x 1

Ethernet signalling - LED link, LED 100Mbit (integrated with RJ45 connector)

Selector - 1 x Switch (access from the front panel)

GPIO - 8 x DI

Direct current - 12 ~ 36 V (optionally 12 ~ 48 Vdc – telecommunication range)

Power draft - 7W max

Dimensions - (width x depth x height) 35 x 120 x 101 mm

Weight - 300g

Casing - ABS, DIN mounting

Working parameters - Operation temperature: -10 ~ 60°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 75°C (for NPE-9100-E).

Storage parameters - Storage temperature: -20 ~ 80°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 85° C (for NPE-9100-E)

Modem GSM/GPRS/EDGE - Waveband GSM/GPRS/EGPRS 900/1800/1900 MHz; GPRS/EDGE Class 10 max. 236,8 kbps (downlink); Compatible with GSM phase 2/2+; - Class 4 (2W @ 900 MHz); - Class 1 (1W @1800/1900 MHz); Antenna connector: SMA (female)

Aditional power draft - 5W max

Aditional weight - 50g