fiber optic 10/100M media converter

10 100Base-Tx to 100Base-Fx
Media Converter

General description:
The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

Features:

1 Built in a 2-port switch:
- Pass all packets without address and CRC check (optional)
- Supports modified cut-through frame forwarding for low latency
- Supports pure converter mode data forwarding for extreme low latency
- Supports flow control for full and halt duplex operation
- Bandwidth control
- Forward 1600 bytes packet for management
- Optional forward fragments
2 Supports 100Base-FX standard
3 Built in 128Kb RAM for data buffer
4 Supports auto MDI-MDIX function
5 Supports link fault pass through function LFP
6 Supports for end fault function optional
7 LED display for link/activity full/half 10/100M
8 Support EEPROM configuration optional
9 the longest transmission distance reach 120 kilometers

Standard:

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

Parameter:

10 100M multimode media converter 10 100M single mode media converter
Cable MM Fiber Twist Pair SM Fiber Twist Pair
Transmission Type 10 100M FDX/HDX 10 100M FDX/HDX
MTBF >3 years >3 years
BER <1E-8 <1E-8
Data Buffer 128Kb 128Kb
Power temperature variation 0.2mw/ 0.2mw/
Input Power Range dBm 0~-30 0~-40
Operate Temperature 0 ~ 70 0 ~ 70
Storage Temperature -45 ~80 -45 ~80
Imax 800mA 800mA
Power 2.5w 2.5w
EMC FCC Part15 FCC Part15
Size 95*70*26mm external power 95*70*26mm external power
internal power 140*110*30mm internal power