auto spray painting room TG-70B

Spray Booth Diesel Burner TG-70B
Inside dimension
6900×3900×2650mm(L×W×H)
Outside dimension
7000×5350×3400 mm(L×W×H)
Wall panel
Thickness: 50mm, steel 0.376mm thick width: 1150mm, tongue and groove interlock structure, with Polystyrene (EPS) insulation inside, color: white.
Doors
Folding door, 3 folds main door, 3000×2600 mm ( W x H), made by bending steel without cover frame, color : blue. Escape door:1 unit, 650×1800m m ( W x H), color : white.
Basement
Galvanized steel assemble,300mm high, quadrate steel support,2 rows of grilles made by flat bar and twisted steel, then painted. 3 rows of indented plates, painted.2 ramps, external setting, 520 x 2000 mm ( W x L )/pc.
Intake air system
1x7.5KW turbo fan, total air capacity is 25000 M³/h. Direct drive type
Exhaust air system
1x5.5KW turbo fan, total air capacity is 20000 M³/h. Direct drive type.
Damper actuates
Pneumatic damper actuates from spraying to baking cycle.
Heating system
Riello G20 diesel burner, stainless steel heat exchanger, the Max. Heating productivity :
200000Kcal/h. Max. working temperature:80℃.
Filter system
Pre-filter, ceiling filter, exhaust fiberglass filter.
Filtering area
21.5M2
Lighting system
Ceiling lights: 8units x 4 pcs =32pcs x 36W.
Side lights: 8units x 2 pcs =16pcs x 36W,
with electronic ballast.
Control system
Spraying, heat spraying, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop. All motors are full voltage start.
Total power
15KW