aluminum rod continuous casting and rolling line

Key words: Aluminum&Alloy Rod Continuous Casting and Rolling Line
Aluminium or Aluminum Rod, Continuous Casting and Rolling Line, Rolling Mill, Rolling Machine, Aluminum Rod
Continuous Casting and Rolling, Aluminum Alloy Rod Continuous Casting and Rolling, Aluminium Alloy Rod CCR line.
Aluminum and alloy rod continuous Casting&Rolling line; Aluminum Alloy Rod&Wire, Al or wire rod manufacturers
Aluminum Wire Rod Casting Machine, Aluminium Casting and Rolling Machine, Aluminum Rod Production Line,
Continuous Casting and Rolling Mill

2. Main component of the Aluminum Alloy Rod Continuous Casting and Rolling line:

The Aluminum Rod Continuous Casting and Rolling Line Equipment is composed of the below equipment:
Aluminum Melting Furnace (vertical fast energy saving furnace)+(online degassing and filter system)+ Holding
furnace(twin-chamber furnace)+(Permanent magnet stirrer)+casting machine+shear+(induction heater)+rolling
mill+rod quenching device+ rod wire coiler (twin-coiler)+(aluminum dross processing machine)


3. Brief Processing or Manufacturing flow chart of the Aluminum &Alloy Rod
Raw materials (Aluminum ingots etc)---Aluminum Melting Furnace (vertical energy saving melting furnace with 5T/h,
6T/h etc.))---Holding Furnaces (twin-chamber holding furnace 8T*2,9T*2,10T*2 etc) )---(online degassing and filter
system)---(permanent magnet stirrer)--- Launder/Molten Aluminum Channel ---aluminum rod continuous casting
machine--- Front Drive Unit---Oil Hydraulic Roller shear---(Rod straightening machine)---Feeding device---Alloy
rod Continuous Rolling mill---Quenching Device---Rod Pulling Device---Continuous Take-up---Rod orbital coiler---
Finished product: 9.5mm,12mm,15mm pure or alloy aluminum rod---(aluminium dross processing machine)


4.Aluminum &alloy Rod Continuous Casting and Rolling Line Equipment for the Electric Wire and Cable
Aluminium Rod Continuous Casting and Rolling Line is used to produce pure aluminum rod (1 xxx series), aluminium
alloy rod with high intensity and heat resistance, such As Al-Mg alloy rod, Al-Mg-Si alloy rod (6201), Al-Ti-B alloy rod
etc. The diameter of the finished aluminum rod is￠9.5mm, ￠12mm, ￠15mm etc. The aluminum rod can be mainly
used for the building materials, or for Electric grade of electric wire and cable, conductor. The aluminum rod CCR line
is competitive with the relative international products. The capacity ranges from 1.5T-6T per hour. The main raw
materials of the aluminum rod can be aluminum ingots, or molten aluminum, or part of aluminum scraps etc. The
quality of the aluminum rod exceed ASTM,JS,DIN and other internationally accepted quality standards.
Features of the Aluminum Rod Continuous Casting and Rolling line:
1. Almost level casting and automatic casting system ensures no turbulent current, and by our special design, the
molten aluminum feeding to casting system is oxide-free.
2. Box type in line degassing unit removes the contents of the hydrogen and impurity in the aluminum liquid with
the small dispersed bubble by the inert gas.
3. Induction heater heats the cast bar before enters the rolling mill, and adjusts temperature automatically, thus
achieving good electrical and mechanical properties.
4. Oil-free coiling system with rollers makes it possible to produce oil-free aluminum rod without the use of grease,
which can save production cost and make workshop clean.
5. The aluminum alloy rod continuous casting and rolling line is competitive with the relative international products.
6. The function of continuous quenching and fast cooling.
7. The tilting type holding furnace is designed to provide easy access for final preparation of individual alloys.
8. With perfect outlook and lower noise and vibration.

9. High efficiency and quality of production & low dissipation energy.
For the full line equipment of?Aluminum or alloy rod Continuous Casting and Rolling Line,Please refer to the below
aluminum rod manufacturing video:
*/v_show/id_XNDAxNjQ2NjY4.html