ZK2130E/1500 Single Axis Gun drilling Machine Tool

Overview:
Processing Method: outside chip removing; gun drill
Hole Diameter(mm): Φ5~Φ30
Hole Depth(mm): 1500
Bench Traverse Distance(mm): 200
NC System: GSK980TDC / FANUC OI Mate TC
Drill Pipe: frequency control; simultaneously rotating and feeding
Workpiece: fixed, non-rotation
Guide Sleeve: hydraulic drive and traverse
Workpiece Clamping: the left side of workpiece is clamped by hydraulic chuck, the right side is supported by hydraulic centre bracket;
Hydraulic chuck and centre bracket can respectively traverse for eccentric orifice drilling purpose
Parameter:
Processing Ability:
1.Number of Spindle(pcs): 1
2. Hole Diameter(mm): Φ5~Φ30
3. Hole Depth(mm): ≤1500
4. Max Workpiece Diameter (mm): Φ270
5. Length Range of Workpiece(mm): ≤1500
6. Max Processing Eccentricity (mm): Φ270
Processing Speed:
1. Max Rotation Speed of Drill Pipe’s Spindle (r/min): 5500
2. Feeding Speed Range(mm/min): ≤1500
3. Forward Speed(mm/min): ≤2000
Processing Accuracy:
1. Hole Skewness: ≤1/1000 (draw ratio≤100)
2. Dimensional Accuracy of Drill Pipe: IT7~IT10
3. Hole Rugosity: Ra0.8~Ra3.2
Power of Machine
1. Drill Pipe Motor Power(kw): 5.5
2. Oil Pump Power(kw): 5.5+5.5(double pump group)
3. Feeding Power(kw): 1.8
4. Power of Oil-temp Cooling Machine(kw): 2.8
5. Total Power(kw): 25
Hydraulic System
1. Max Volume of Flow(L/min): 110
2. Max Pressure(Mp): 12
3. Filtering Accuracy(um): 20
4. Oil Storage Capacity(L): 1360
Basic Dimension & Weight
1. Dimension (mm): 6000*3200*1500(L*W*H)
2. Height between Drill Pipe Centre and Ground(mm): 1070
3. Weight of Hydraulic System (kg): 2000
4. Weight of Main Engine(kg): 7000