ZK2115 E X2/1000 Dual-axis Gun drilling Machine Tool

Overview:
Processing Method: outside chip removing; gun drill
Hole Diameter(mm): Φ5~Φ15
Hole Depth(mm): 1000
Axis Centre Distance(mm): 207 (can be customized)
NC System: GSK980TDC / FANUC OI Mate TC
Drill Pipe: frequency control; simultaneously rotating and feeding
Workpiece: NC indexing
Guide Sleeve: hydraulic drive, axial positioning
Workpiece Clamping: the left side of workpiece is clamped by hydraulic chuck, the right side is supported by hydraulic centre bracket, around axis indexing can be numerical controlled;
Drill two holes at one time
Parameter:
Processing Ability:
1. Number of Spindle(pcs): 2
2. Axis Centre Distance(mm): 207
3. Hole Diameter(mm): Φ5~Φ30
4. Hole Depth(mm): ≤1000
4. Max Workpiece Diameter (mm): ≤Φ270
5. Length Range of Workpiece(mm): ≤1000
6. Bench Traverse Distance(mm): 200
Processing Speed:
1. Max Rotation Speed of Drill Pipe’s Spindle (r/min): 5500
2. Feeding Speed Range(mm/min): ≤1500
3. Forward Speed(mm/min): ≤2000
Processing Accuracy:
1. Hole Skewness: ≤1/1000 (draw ratio≤100)
2. Dimensional Accuracy of Drill Pipe: IT7~IT11
3. Hole Rugosity: Ra0.8~Ra3.2
Power of Machine
1. Drill Pipe Motor Power(kw): 5.5
2. Oil Pump Power(kw): 7.5(double pump group)
3. Feeding Power(kw): 1.2
7.0(M.N)
4. Power of Oil-temp Cooling Machine(kw): 3.5
5. Total Power(kw): 29
Hydraulic System
1. Max Volume of Flow(L/min): 80
2. Max Pressure(Mp): 12
3. Filtering Accuracy(um): 20
4. Oil Storage Capacity(L): 1360
Basic Dimension & Weight
1. Dimension (mm): 5100*2700*1800(L*W*H)
2. Height between Drill Pipe Centre and Ground(mm): 1070
3. Weight of Hydraulic System (kg): 2500
4. Weight of Main Engine(kg): 5000