XFP Transceiver

Eoptolink XFP transceiver is a high performance, cost effective modulse for serial optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 850/1310/1550 nm, XFP SR, SFP LR, XFP ER and XFP ZR. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and excellent responsivity or APD high sensetivity receiver.
Features:
Supports 9.95Gb/s to 11.3Gb/s bit rates
IEC 60825-1 Class 1/CDRH Class 1 laser eye safety.
Hot-pluggable XFP footprint
Maximum link length of 80km
DFB or Temperature-stabilized EML Transmitter
XFI Loopback Mode
Duplex LC connector
Low Power dissipation
Superior Thermal and EMI integrity performance to support high port densities
LC Duplex optical connector interface conforming to ANSI TIA/EIA604-10 (FOCIS 10)
Built-in digital diagnostic functions, DDMI
Temperature range -5C to 70C or Indutrial Temperature range on request
RoHS-6, CE, FDA, FCC, TUV, UL certifactes
Application:
SONET OC-192 / SDH STM-64
ITU-T G.709
10GBASE-SR/LR/ER/EW/ZR
10GBASE-SR/LR/ER/EW/ZR+ FEC
10/40/80 km 10G Fibre Channel
10/40/80 km 10G Fibre Channel + FEC
Ordering information:
Package Part No. Fiber Type Data Rate Range Wavelength Optical Components Distance Range Case Temperature range Application
XFP EOLX-8596-02 MMF 9.95~10.3G 850nm VSCEL/PIN <300m 0~70 Ethernet,10GFC
XFP EOLX-8596-02-I MMF 9.95~11.1G 850nm VSCEL/PIN <300m -40~85 Ethernet,10GFC
XFP EOLX-1396-2M MMF 9.95~11.1G 1310nm FP/PIN <220m 0~70 Eth,SDH,10GFC
XFP EOLX-1396-02 SMF 9.95~11.1G 1310nm FP/PIN 2km 0~70 Eth,SDH,10GFC
XFP EOLX-1396-10 SMF 9.95~11.1G 1310nm DFB/PIN 10km 0~70 Eth,SDH,10GFC
XFP EOLX-1396-10-I SMF 9.95~11.1G 1310nm DFB/PIN 10km -40~85 Eth,SDH,10GFC
XFP EOLX-1396-20 SMF 9.95~11.1G 1310nm DFB/PIN 20km 0~70 Eth,SDH,10GFC
XFP EOLX-1396-20-I SMF 9.95~11.1G 1310nm DFB/PIN 20km -40~85 Eth,SDH,10GFC
XFP EOLX-1396-40 SMF 9.95~11.1G 1310nm DFB/PIN 40km 0~70
XFP EOLX-1396-40-I SMF 9.95~11.1G 1310nm DFB/PIN 40km -40~85
XFP EOLX-1396-70 SMF 9.95~11.1G 1310nm DFB/PIN 70km 0~70
XFP EOLX-1396-70-I SMF 9.95~11.1G 1310nm DFB/PIN 70km -40~85
XFP EOLX-1596-40 SMF 9.95~11.1G 1550nm EML/PIN 40km 0~70 Eth,SDH,10GFC
XFP EOLX-1596-40-I SMF 9.95~11.1G 1550nm EML/PIN 40km -40~85 Eth,SDH,10GFC
XFP EOLX-1596-80 SMF 9.95~11.1G 1550nm EML/APD 80km 0~70 Eth,SDH,10GFC
XFP EOLX-1596-80-I SMF 9.95~11.1G 1550nm EML/APD 80km -40~85 Eth,SDH,10GFC
XFP EOLX-1596-A SMF 9.95~11.1G 1550nm EML/APC 100km 0~70 Eth,SDH,10GFC
WiKi XFP Transceiver
XFP modules are hot-swappable and protocol-independent. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management
that were added to the SFF-8472 standard. XFP modules use an LC
fiber connector type to achieve high density, XFP were introduced after XENPAK and X2 modules.
Depth XENPAK XPAK X2 XFP
Power (W) 6 4 4 1.5, 2.5, 3.5
Width (mm) 36 36 36 18.35
Length (mm) 121 85.4 91 71
Depth 115.2 75.7 77.2 61.7