Vertical Shaft Impact Crusher---PCL series

Application
Shibang vertical shaft impact crusher also know as sand making machine is applied widely for the powder process of mineral product including mental and non-metal ore, fireproof material, bauxite, diamond dust, glass raw materials, architectural materials, artificial sand and all kinds of metal ore materials, especially which has more advantages than any other machines in processing the more and most hard materials.

Features and Benefits
* Simple structure, low cost
* High efficiency and low consumption
* Primary and second crushing capacity
* More and most hard materials can be crushed
* Cubic shaped final product
* Little noise and dust pollution
* Convenient performance, maintenance, installation

Working Principle
The Whole PCL vertical shaft impact crusher including feed hopper, classifier, whirl pool cacity, impeller, main bearing assembly base, transmission device and motor etc.
Operating principle is as follows: the materials enter the crusher through feeder hopper, which is divided into two parts, one part through the middle of classifier entering into the rotating impeller at high speed, then accelerated, whose speed can reach hundreds of acceleration, then is shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around classifier, then impact on the whirlpool cavity's scaleboard together, then will be rebounded and impact on the top of the whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crusher, milled twice or more times in the whirlpool cavity, then crushed materials will be excluded through the bottom discharging hole. This can from a closed circulation through the circular classifier system; in general, materials can be crushed into 20 mesh through thrice circulation. Airflow self-circulation in the whirlpool cavity can eliminate the dust pollution well.

Available models are PCL-600, PCL-750, PCL-900, PCL-900B, PCL-1050, PCL-1250, PCL-1350.

Specification

Model: PCL-600
Max. Feeding (mm):30
Power (Kw):2x30
Impeller speed (r/min):2000-3000
Output (t/h):12-30
Outer dimension: LxWxH (mm):3000x1500x2050
Weight (T):5.6

Model: PCL-750
Max. Feeding (mm):35
Power (Kw):2x45
Impeller speed (r/min):1500-2500
Output (t/h):25-55
Outer dimension: LxWxH (mm):3300x1800x2440
Weight (T):7.3

Model: PCL-900
Max. Feeding (mm):40
Power (Kw):2x55
Impeller speed (r/min):1200-2000
Output (t/h):55-100
Outer dimension: LxWxH (mm):3600x2140x2620
Weight (T):12.1

Model: PCL-900B
Max. Feeding (mm):40
Power (Kw):2x75
Impeller speed (r/min):1000-1450
Output (t/h):65-130
Outer dimension: LxWxH (mm):3600x2140x2620
Weight (T):13.6

Model: PCL-1050
Max. Feeding (mm):45
Power (Kw):2x (90-110)
Impeller speed (r/min):1000-1700
Output (t/h):100-160
Outer dimension: LxWxH (mm):4480x2450x3906
Weight (T):16.9

Model: PCL-1250
Max. Feeding (mm):45
Power (Kw):2x (132-180)
Impeller speed (r/min):850-1450
Output (t/h):160-300
Outer dimension: LxWxH (mm):4520x2640x3100
Weight (T):22

Model: PCL-1350
Max. Feeding (mm):50
Power (Kw):2x (180-220)
Impeller speed (r/min):800-1193
Output (t/h):200-360
Outer dimension: LxWxH (mm):5340x2940x3650
Weight (T):26

Note: This specification is just reference, any changes are subject to the products.