U-PVC Well-Casing&Screen Pipes

-PVC Well Casing and Screen Pipes for cold-water Wells-
-Duzgunler Plastic produces a high quality range of PVC-U well casings and screens strictly in accordance with the Standard TS 11794 and ISO standarts, class I, II and III. The standard TS 11794 and ISO applies as well for raw materials and workmanship of pipes used in the manufacture of the casing and screen. There are three basic ranges - a standard range for shallow, medium well depth and a heavy duty, thick walled range for greater well depths.
The casing and screens are made from 100% virgin unplasticized poly vinyl chloride compound and are coloured grey. They are supplied with a male pipe thread at the spigot end and a female pipe thread at the socket end. No re-worked material is used.
The pipe is produced under ISO 9001:9002 Quality Management System.
Screens can be supplied with either a plain or filtered surface. Slots are arranged vertically to improve the mechanical strenght of the screens and are designed to give open areas ranging from 6% to 12% depending on the size and slot width.

Raw Material:PVC-U
Length: Normally supplied in 2m. - 3 m. and 4 m. lengths. Other lengths available on request
Slot Width of Screens Pipes: Available slot width 2.0 mm.
Joints: Each length is supplied with a standard Male/Female socketed joint
Marking: Standard marking is applied to all casing and screen.
There are 4 types of Well Casing and Screen Pipe:
1-Apllied to 50m. depth (black head)
2-Applied to 100m. depth (blue head)
3-Applied to 300m. depth (red head)
4-Applied to 500m. depth (gren head)
-Diameters of Well Casing and Screen Pipes-
Metric (mm) Imperial (Inch)
113 4
125 5
140 5 1/2
175 6 5/8
200 8
225 8 5/8
250 9 1/2
280 10 1/2
330 12 1/2

Nore*: The 50 m. depth pipes only have 140,170,200 mm
Fittings:
Reducing Couplings and Filtered End Caps available