Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB

FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certification
Excellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivity
Mix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.
Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.
GOLOHO-4313(W)-AB is a two part flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .

HOW TO USE Two part Silicone Adhesive GOLOHO-4313-AB
Stirred thoroughly before mixing
Mixed in 1:1 ratio by weight
Agitation: mixed thoroughly by low speed agitation
Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes