Ti Frit

Ti Frit Feature
1. Ti frit is made from ti powder particle
2. Ti frit is sintered in a high temperature vacuum furnace. So ti powder particle will not shed
3. Ti frit is surface filtration and depth filtration
4. Ti frit has narrow pore size distribution
5. Ti frit is a suitable for food industry and medicine industry (GMP) because ti is an in-noxious metal and an inert metal
6. High dirt holding capacity
7. Good porosity
8. High filter rating accuracy
9. The effect of filtration is good
10. High filter efficiency
11. Good permeability
12. Pressure loss is low in filtration process
13. High flow rate at low differential pressure
14. High compression strength
15. Good mechanical strength
16. Good abrasion resistance
17. Good durability against most liquids, gases and aggressive steam
18. High temperature resistance
19. High corrosion resistance
20. Backwash
21. Washable and Cleanable
22. Reusable
23. Long service life
24. Easy to be welded, fabricated

Ti Frit Technical Data
Raw Material: Ti
Filter Rating: 0.22-100 Microns
Operation Temperature: ≤ 300 ℃
Diameter: ≤ 400 mm
Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others

Application
Sensor, inductor, detector, survey meter, pressure release device, polymer extrusion device,
polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry