Take up system T1

Automatic take up system T1

Widely Application:
Water-based media: PP, Adhesive sticker, Transferpaper, Pictorial cloth etc.
Eco-solvent media: Car sticker, Wallpaper etc.
Sublimation media: Banner, Chemical fabrics without elasticity etc.

Advantage:
The first set take up system with inductive tension and track structure in domestic. Motor drive, Long life, roll tidily.

1. The first set take up system with inductive tension and track structure in domestic. Automatic take-up, Save man power, Reduce cost.

2. Adopt the inductive tension structure, Stretch the graphics smoothly. Avoid the media deviating or scratching nozzles in the process of printing. Roll the media tidily.

3. Novel double track structure, Bearing weight of 40KG.

4. Removable main parts can move freely in the sliding channel, Convenient to adjust the length. Equip with screw nut, Fix the paper core firmly, Ensure the graphics stretched flatly and smoothly.

5. Both 2 inches (φ48mm-φ53mm) and 3 inches (φ75mm-φ80mm) are available for the paper core.

6. Automatic Switch: Relying on the inductive tension, Achieve automatic take-up.

7. Manual Switch: If Motor need to pause, and extract the graphics in the process of rolling, Set the induction switch to “Manual”, Then set the switch of main part right to “Reverse”.

8. On both sides of the bottom, Equip with screw to adjust the level.

9. Linking slab apply to MUTOH printer.

10. Linking slab apply to ROLAND, MIMAKI, EPSON printer.