TSP Polycrystalline Diamond Petroleum & Geology Industry [email protected]

Details：
Polycrystalline Diamond Is A Diamond Combo Produced By Synthetic Diamond Sintered With Bond Under High Temperature And High Pressure; It Has Very High Wearability And High Thermal Stability. Its Widely Used In Petroleum Extraction, Diamond Machining, Geology Drill And Mechanical Processing Tools.
Application：
Used For Drilling, Geological Prospecting, Drilling Bits Calibre Insert, The Crystal With High Hardness, Vickers Hardness Usually In 105N X = 1.20 Proposed. And Was Compared, And Cost/Natural Diamond And Very Cheap, Wear-Resisting Degree Is High, The Shape Of Triangular, Square, Rectangle, Cylindrical, Arc Ends, Its Diverse And Drilling Tools And Applicable To Various Geological Requirements
Introduction of PDC (Polycrystalline Diamond Compact)
PDC is made of diamond micro-powder and hard alloy substrate under high temperature and high pressure. It possess of high wear resistance like diamond, at the same time the impact resistance like hard alloy and that’s made it the best material as a drill bit cutter. Reinforced PDC has higher dense diamond powder, claw hard alloy substrate made the two layers solid as whole one. So, the reinforced PDC of supper wear resistance, longer service life and high efficiency.

Polycrystalline Diamond TSP Series
Type: D × H × Α (Mm)
Φ 1 × 1.2 × 120
Φ 1.2 × 3.5 × 120
Φ 1.5 × 3.5 × 180
Φ 1.5 × 4 × 180
Φ 1.8 × 4 × 180
Φ 2 × 4 × 120
Φ 2 × 4 × 180
Φ 2.7 × 4 × 120
Φ 3 × 3 × 180
Φ 3 × 5 × 120
Φ 3 × 5 × 180
Φ 3 × 6 × 120
Φ 4 × 4 × 180
Φ 4 × 5 × 90
Φ 4 × 5 × 180
Φ 4 × 6 × 120
Φ 5 × 4 × 180
Φ 5 × 5 × 120
Φ 5 × 5 × 180
Φ 5.3 × 2.1 × 180
Φ 6 × 3 × 180
Φ 6 × 4 × 180
Φ 6 × 6 × 120
Φ 6 × 6 × 180
Φ 6 × 8 × 120
Φ 6 × 8 × 180
Φ 6 × 12 × 120
Φ 6 × 12 × 180
Φ 6.3 × 3.3 × 180
Φ 8 × 2.6 × 180
Polycrystalline Diamond Square And Triangular
Type: D× H × T (Mm)
□ 1.5 × 1.5 × 1.5
□ 1.5 × 1.5 × 3
□ 1.5 × 1.5 × 5
□ 2 × 2 × 2
□ 2.5 × 2.5 × 2.5
□ 2.5 × 2.5 × 5
□ 3 × 3 × 3
□ 3 × 3 × 4
□ 3 × 3 × 6
□ 3 × 3 × 5
□ 4 × 4 × 2.5
□ 4 × 4 × 4
□ 4 × 4 × 6
□ 4 × 4 × 8
□ 5 × 5 × 5
□ 5 × 5 × 8
△ 4 × 4 × 4 × 2.6
△ 5 × 5 × 5 × 3
△ 6 × 6 × 6 × 3.5
△ 6 × 6 × 6 × 4
△ 6 × 6 × 6 × 4.5
△ 6 × 6 × 6 × 5
△ 7 × 7 × 7 × 2
△ 3 × 3 × 10
























Advantages of PDC
1. PDC cutters for high speed drilling;
2. All cutters are premium grade for extended bit life and durability;
3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl;
4. More total footage, faster ROP, reduced cost-per-foot;
5. Advanced geometric design for faster penetration;
6. Gauge pads have tungsten carbide inserts for maximum wear resistance;



Why choose our product
Our product’s advantages:
1.High grinding efficiency
2.Wonderful edge quality
3.Long service life
4.High polishing efficiency
5.Large Exports
6.Considerable after-sell service
7.Amazing performance
8.Various types and sizes available
9.Direct Factory Manufacturer
10.Backing/substrate material: Aluminum
11.Abrasive layer: diamond
12.Bond: vitrified
13.Excellent cutting edges
14.Reduced cycle times
15.Custom Engineered


If you have any questions, please contact us
WhatsApp:+8618638297665
Skype:18638297665
*
Tel:18638297665
URL:*