Straightening and Cutting Machine for Steel Wire Rods

The machine is widely used in hardware products. Handicrafts. The various fields of daily production.
For example: bicycle basket. The frame of the frame. The cage. The refrigerator shelf. The electric fan cover. The wire for the construction USES silk.
The production efficiency is high, the normal operation hind basically is not to be taken care of.
The speed of processing is fast, and can be raised to 25 to 30 meters per minute.
The cut length is adjustable, the length of each customer is different, please contact the business when ordering.
.
The accuracy is high, the actual cutting error is less than 0.3 mm, the error in the one meter is less than 0.5 mm
Power consumption is low, using only 3.75 kilowatt-hours per hour.
Maintenance and safety

Ensure that there is sufficient lubricating oil in the driving box and replace it regularly.

Lubricate the ends of the straight tube with dry oil and fill regularly.
The head of the hammer slide will be refuelled once per class, and the square one will be refuel once every class.

3, the section of the frame of the pan is added to the dry oil regularly, and the loading bracket is for each class to be lubricated.

Check hammer head and knife condition regularly, if damage is changed in time.

Do not turn on the belt cover and the shaft for driving, in case of danger.

6, the machine parts should be equipped with ground wire.
Email: * *
skype:*
Telephone:13582685126 0318-5183155