Standard Salt Spray Test Machine

This device is used to test the surface treatment of various materials. The so-called treatments include coating, electroplating, films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.

Feature & Parameters
1. The whole system using PVC plate, lined with the use of advanced three-dimensional reinforcement ring technology, structure and strong real, never deformation.
2. Five direction heating system to ensure heat distribution within ¯1oC.
3. Highly advanced spray nozzle with accuracy of spray misting within ¯0.3ml/80cm2.
4. Saturated air with Henry's law. In order to heated humidification, and provided the necessary laboratory humidity.
5. Temperature control uses P.I.D temperature controller within ¯0.3oC accuracy.
6. The only use of early warning device test solution is too low, when the test solution is only enough for 5 hours and then spray the buzzer supplement will notify the user to ensure that the test of the value of the continuous spray.
7. The only use the full detection system, when a failure occurs, you can display or alarm lights inform.
8. With a spray and standing time period setting (for CAPA, SAE, ASTM).
9. Meets ASTM B117-03 the new improved design.

MODEL
STD-9701
STD-9701C
TEST APPLICABLE
NSS, ACSS, CASS
CORK
TEST TEMPERATURE
35oC¯1oC or 50oC¯1oC
38oC¯1oC 80%~99%RH
INSIDE DIMENSION
900x600x500(WxDxH) mm
900x600x500(WxDxH) mm
OUTSIDE DIMENSION
1420x780x1280(WxDxH) mm
VOLUME
270 LITER
WEIGHT
150KGW
TEST SPECIMAN (150x70mm)
at angle of 20o¯5
48 PCS
SOLUTION TANK
CAPACITY
30 LITER
TESTING TIME
180HR
POWER CONSUMPTION
220V SINGLE PHASE 3KW