Smart Laser Scanner

Smart Laser Scanner
Hashu serie is a highly integrated galvanometer scanning system. The galvanometer control card is perfectly integrated into the inside of the scan head, and the Ethernet connection to the computer can be used for marking. The galvanometer driver board and laser control card are integrated into one system, and the reliability is very high. Special optimization realizes synchronous real-time control of galvanometer and laser, and supports remote control within LAN. The built-in control card adopts dual-core ARM architecture with powerful performance. Scanworld laser machining software requires no driver installation and is easy to use.

Key Features Of Smart Laser Scanner

Product composition: Laser processing head; Laser marking software

Scanner: Adopt dual-core ARM architecture and dominant Frequency 800MHz, equipping with 512MB DDR3 memory and onboard 256 Mbit

ScanWorld: High-precision BOX correction function with calibration precision up to 6μm and support 3D focus calibration

Easy to use without the extra installed control card

Easy to make wire with good reliability

Remotely control in LAN

Support SD card storage and work offline marking.

Specifications Of Smart Galvo Scanner Laser
14mm
10mm
Input Beam Aperture (mm) 10 14
Beam Displacement (mm) 12.54 16.42
Tracking Error (ms) 0.18 0.3
Repeatability (³´µrad) ＜2 ＜2
Offset Drift (³´µrad/K) ＜15 ＜15
Gain Drift (ppm/K) ＜80 ＜80
Long-Term Drift Over 8 hours (mrad) ＜0.3 ＜0.3
1% Of Full Scale (ms) 0.4 0.65
10% Of Full Scale (ms) 1.2 1.6
Positioning Speed (m/s) 10 7
Typical Scan Angle (®) ¯12.5 ¯12.5
Gain Error (mrad) <5 <5
Zero Offset (mrad) <5 <5
Nonlinearity (%) <0.4 <0.4
Power Requirements ¯15VDC, ≥3A ¯15VDC, ≥3A
Operation Temperature (℃) 25¯10 25¯10
Weight (kg) 1.9 2.3

Now the galvanometer cost is reasonable, anything you need, please contact us.