Shuttle Valve - Steel raw materials, no leakage in working position, hydraulic shuttle valves by Fi

Finotek shuttle valve is operated by hydraulic oil and design for screw-in connection and plate position installation. The SV shuttle valve allows the flow in one each direction and block the flow from the T port, there are a high strength stainless ball in the valve chamber to open and stop each in put pressure at A or B port. This design is better for high pressure with two alternative inlet pipe requirements, it is much convenient for hydraulic pipe installation without any cartridge cavity.
Finotek tests the shuttle valve with 100 percent for each without any oil leakage. There are various connection threads of shuttle valve as per different hydraulic system requirements. The raw materials will be able to carbon steel, stainless steel, aluminum apply to each different working position. 
Technical information:
Main Raw Materials:High strength carbon steel or casting Iron
Power:By hydraulic oil
Brand:Finotek or OEM
Max. Operation Pressure:35Mpa
Max. Flow Rate:35L/Min.
Connection type:Threaded 
Oil Medium Temperature:-30 to +80cel. for NBR O-rings
Oil Medium:Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 - 400 CST
Recommended Medium Filtration:ISO 4406 Standard, cleanliness class:20/18/15