Shaking table

Introduction

Shaking table is popular with mine owners and it is used to classify the granularity 2-0.2mm ore and ore slime, tungsten, niobium, manganese, chromium, titanium, zinc, gold, iron and other metallic minerals. It is composed of bed, bed head and driving merchandise three parts. According to feed ore sizes and ore density, proper bed type can be chosen .
Features
The rich ore ratio (the ratio between concentrate and raw ore) is far higher than other ordinary beneficiation methods.
Eligible concentrates and ineligible tailings can be provided at one time.
Minerals are in the shape of sector, which makes it easy for observation and adjustment.
The partition plate can separate minerals with different properties, so different kinds of minerals can be provided.

Application
Concentrating table is applicable to fine minerals, like tungsten, tin, tantalum, niobium, other rare metals and precious metals. It is also able to process ferro-manganese and mica and reclaim iron from tailings.

Working principle
This machine is composed of three parts, i.e. head of shaking table, surface of shaking table, as well as bearing and adjusting gradient. The working principle of this machine is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch  groove), to allow loose layering of ores on the bed surface and fan-shaped  zoning. Then different products can be produced.

Technical parameters

Model Length×Feed end width×concentrate end width Stroke(mm) Stroke time(time/min) Cross-section
Shape of deck The feed
particle
size of
ore
placer The feed
particle
size of
slime
YC(S)-3000×1320 3000×1320×1100 6～30 210～320 0～10 -2 -0.1
YC(S)-2100×1050 2100×1050×850 12～28 250～450 0～8 -0.074
YC(S)-1100×500 1100×500×430 9～17 280～460 0～10 -0.074

Model Water consumption
(t/h) Processing
capacity of
ore placer Processing
capacity of slime Motor
model Motor
power Weight
YC(S)-3000×1320 0.3～1.5 0.7～1.5 0.4～1 Y100L-6 1.5 650
YC(S)-2100×1050 0.2～1 0.4～0.8 0.3～0.5 Y90L-6 1.1 450
YC(S)-1100×500 0.1～0.5 0.1～0.2 0.05～0.1 Y80L-4 0.55 150
http://www.ytxinhai.com/en/
http://www.xinhaimining.com/en/