Saudi Arabia 12.5m 3-Axle Flatbed Trailer

Payload Capacity(kg) 30,550/30,300/30,000(Approximately)
GVW(kg) 40,000(Maximum)
Chassis frame Welded IPE420 main Beam,140mm width, the top and bottom flange 14m web 6mm thickness. Side, front and rear beam is 16# UPN 160x65 mm, Cross member is IPE80x46mm.Main steel material Q345.
Axle and Suspension Heavy duty axle, BPW brand
3*12ton-Air suspension.
90 mm air bellows shoe should be installed on all air bellows.


Brake System Air brake, dual circuit.
Linkage-free parking brakes.
Main brake valves and ABS are WABCO brand, Glad hand valve, Connector, hose and accessories are Chinese brand.
All brake lines are protected with high quality insulation hoses and attached to the chassis with insulated clamp.
Electrical System 24 VDC.

Cables & Harnesses Electrical cable wiring is appropriately harnessed and protected with an appropriate size of protective insulation.
Cable harness is properly laid out and held with appropriate sizes of insulated clamps.
Trailer Exterior
Lighting Total of 10 side marker lights, 5 on each side of the trailer, symmetrically placed to cover the total length of the trailer.
Two sets on each side of the trailer's rear end. Each cluster includes reflector red in color and the dimensions are 10cm parking light, brake light, direction light, & reverse light and horn.
License lights-2 pieces.
Coupling Connector All weather 7-pin connector.
King pin 2