SMD molding power inductor

Item Specifics:


Model: PIM1030R12MZ

L0(uH)/inductance at 0A,100KH):Typ.:0.12

DCR (mΩ)at 25°C:Typ.0.65/Max:0.75

Irated(Adc)/Heat RatingCurrent :Typ.:30

Isat(Adc)/Saturation Current:Typ.:75

Available L0(uH):From 0.12 to 10.00



Molded Power Inductor

Operating temperature : -55℃ ~ +125℃

Ambient Temperature, Maximum : 85℃

Temperature Rise, Maximum: 40℃


※ Features

• Low profile, high current SMD type. Lowest DCR/µH, in this package size, Low buzz noise due to its gap-less structure, RoHS compliant.

• Frequency range up to 5MHz.

• Lowest DCR/µH, in this package size

• Low buzz noise due to its gap-less structure

• RoHS compliant.


※ Applications

• Notebook/Desktop/Server/Video Card applications.

• High current POL converters.

• Low profile, high current power supplies

• Battery powered devices.

• Ideal for power source circuits, DC-DC converter

• DC-AC inverters inductor application.



Note:


1. L0 is inductance tested at 0 Adc.

2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current.

3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40℃.

4. Operating Temperature Range: - 55℃ to +125℃

5. The part temperature (ambient + temp rise ) should not exceed 125℃ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application.

6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.



We could design according to customer's requirement(such as different inductance, DCR, Irated etc)

Thank you for spending time learning about our product. Asking for samples now!