SHIP TOWING ROPE

1.PARAMETER

Material:CHNMAX HMPE fiber

Diameter:4mm-140mm(can be customized)

Length:220m/coil



2.ADVANTAGE



♣HMPE Ropes can replace the Steel wire Ropes in some applications which makes very easy and light and very less labourious . Its applications range from Mooring Lines, Tug assist Lines, Face and Wing Lines, Winch Lines, Pulling Lines, Rig Mooring lines, Speciality Lines,etc

♣ HMPE ROPE is more than ten times stronger than steel per unit of weight. This means that a rope from HMPE fiber has a slightly higher strength than a steel wire of the same dimension but less than one tenth of the weight

♣ HMPE ROPE can sustain a very large number of peak loads (loads close to the breaking strength). This gives a long life and a high safe-working load. While steel-wire can take 6500 loads at 50 % of the maximum breaking load

♣ HMPE ROPE has a very low elongation (2-3% at break). It stores little energy and has therefore little backlash even at hundreds of tonnes of load. This is a very important safety feature

♣ HMPE ROPE has a better stability to sunlight than other relevant s. After two years of exposure 80% of the strength is retained

♣ HMPE ROPE is resistant to chemical substances and will not be affected by oil acids or other substances.

♣ HMPE ROPE has an excellent abrasion resistance compared with other synthetic fibres (five times better than polyester). Special care has to be taken, however, in order to ensure that it moves over clean non-rusty surfaces etc.Sharp edges etc. should be avoided.

♣ HMPE ROPE has good bending-bending properties. However it is recommended to bend over diameters of at least five times the diameter of the rope

♣ CHNMAX rope is the most compact rope from HMPE fiber in the world. CHNMAX rope is coated with a unique coating that ensures shape stability and increased abrasion resistance for longer working-life. The rope is heat-set under tension to ensure maximum strength, durability and uniformity