SAE steel shot s330 with long life time 3200 times

This type of shot is made for use in shot blasting and blasting processes under pressure by compressed air. It is basically used on non-ferrous metals such as aluminium, zinc alloys, stainless steels, bronze, brass, copper...

With its wide range of gradings, it is used for cleaning, deburring, compaction, shot peening and general finishing processes, on all kinds of parts, without contaminating its surface by ferrous dusts which deteriorate and change the colour of the treated metals. It is ideal for the aging of marbles and granites.

Total quality controls are applied inspecting: grading, grain sphericity, composition and resistance.

steel shot blasting
Steel shot cleaning the casting sand and burnt -on sand of the casting to make the surface get good cleanliness and required roughness, so that can be benefit to the subsequent processing and coating.

Cast steel shot for Steel plate surface preparation
Cast steel shot cleaning the oxide skin, rust and other impurity by shot Blasting, then using the vacuum cleaner or the purified compressed air to clean up the steel products surface.

Steel shots used for Engineering machinery
Steel shots used for Machinery cleaning can effectively remove the rust, welding slag, and oxide skin, eliminate the welding stress,and increase basic binding force between rust removing coating and the metal ,thus greatly enhancing the derust quality of engineering machinery spare part.

Steel shot size for Stainless steel plate cleaning
Steel shot size to achieve clean, luminous, exquisite burnish surface treatment of stainless steel plate, it is a must to select the suitable abrasive materials to remove the scale from cold rolled stainless steel surface.
According to different grades,the stainless steel surface needs to select different diameter abrasives and proportion to process. Compared to the traditional chemical process, it could lower the cleaning cost and achieve green production.
anna (at) honest-horse.com
0086 15628820220