Rubber Coarse-Crusher

Type ZKC-560A
ZKC-560B
ZKC-560D

Working Diameter of Front Roll(mm)
510
510
510

Working Diameter of Back Roll(mm)
560
560
560

Working Length of Rolls (mm)
800
800
800

Linear Speed of Front Roll(m/min)
23.7
24.3
23.37

Linear Speed of Front/Rear Rolls
1:1.55
1:1.55
1:1.55

Max. Nip
15
15
15

Capacity (Kg/h)
2000
2000
2000

Main Motor Model
Y315M1-6
Y315L1-8
Y315L2-8

Motor Power(KW)
90
90
110

Motor Rotating Speed(r/min)
980
740
740

Speed Reducer
Inverted-Y Speed Reducer
NGW Planetary Hard-Gear Speed Reducer

Reduction Ratio
11.6
34.65
35.64



Overall Dimensions(mm)
Length
5400
5430
5500

Width
2330
2330
2330

Height
2100
2100
2100

Weight(KG)
17500
20000
20000

The machine is applicable for cracking scrap rubber.
The roller is made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. Both the front roller and the back roller are fluted. The internal cavity of the roller is processed to make temperature well proportioned on the roller surface.
The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.
The machine is also equipped with an emergency device. When an emergency accident happens, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
The turning of the cylinder sieve will repeatedly send back those unqualified bigger rubber chips for further cracking.