Rubber Bridge Bearing to Indonesia

Contact information
Sales Manager:     Miss lurywen
Mobile Phone:      +86-13323183257
Tel:                        86-318-5106277
Fax:                       86-0318-5106277
Website:                *
Company:             Hengshui Jianfeng Engineering Rubber co., LTD. 



1.The  kinds of elastomeric bearing
      Three
      Non-Reinforced elastomeric  pad
      Laminated elastomeric bearing  pad
      Elastomeric Bearing Components- Sliding Desig



2.The kinds of rubber material and description of each
      Natural Rubber : applicable temperature -40® C~50® C.
      Neoprene Rubber: applicable temperature -25® C~60® C.
      Normally, The rubber material for elastomeric bearings are requestedto used
      in different areas,sometimes in different projects.



3.STANDARDS
      European standard and ASTM standard.



4.What tests we can do?
       1.Material Testings, which are about physical properties of matierals.They
           are normally listed on the standards.
       2. Production Inspections, which control the whole producion process by
           thirddepartment as customers' requests.
       3.Finished product quality control by testing. Tested in our own lab or in a
           third department lab as SGS or any lab in your countries.

          The whole test procedure is complicated but necessary,
          How to make it easy? we can supply samplies for our clients to test directly.

Rubber Bearing Pad Specification (BS-5400 P.T 9.2)
Tensile Strength, Mpa 15.5
Elongation at Break, Minimum 400%
Hardness, IRHD 56-65
Ozone Resistance (25pphm/20% strain/96h/30® C) No Cracks
Bond Strength, Minimum 7 N/mm
Ageing Resistance (7 days/70® C in Air)
Maximum Change from initial values:
Hardness, IRHD 10
Tensile Strength, % 15
Elongation at Break, % 15
Compression Set, % (22h / 70® C) 30 max

-40%