Remote Control IR Repeater/ IR Extender with 1 Receiver & 1 Emitter

Remote Control IR Repeater/ IR Extender with 1 Receiver & 1 Emitter ( for 1 AV Device ) & USB 5V adaptor U101-P




To amplify the IR signal of remote control for 1 AV player such as IPTV. CD/VCD/DVD/ Blu-ray, Home System, Television, Setup box, recorder, CATV, Karaoke system, etc. It is also recommended for Players/ Equipments which are concealed in console or cabinet.






Series available as follows :

U Series powered by USB 5V and D series powered by DC12V
U101, U101A, D101 --- 1 Receiver 1 Emitter ( for 1 AV Equipments )
U102, U102A, D102 ---1 Receiver 2 Emitters ( for 2 AV Equipments )
U104, U104A, D104 ---1 Receiver 4 Emitters ( for 4 AV Equipments )

U101-P. U101A-P, U102-P, U102A-P, U104-P, U104-AP etc. – USB 5V Adaptor Included
U101, U101A, U102, U102A, U104, U104A etc. – USB Power Adaptor not included






PACKAGES :

1. USB Adaptor 5V 500mA
Our U series which is powered by USB adaptor ( Included ) can also be powered by connecting the USB cable to the USB port on your AV Equipment.

2. IR Receiving Head is distributing :
(1). USB ( use to connect to USB 5V adaptor or AV devices for power ) Length : 2m
(2). IR Emitter ( Emitter to be stuck on the IR Point of your AV equipment ) length : 3m







INSTALLATION :

1. Clean the surface of your AV equipment. Stick the IR Emitter on the IR point of your AV Equipment

2. Place the IR Receiver such a way that it is facing your remote control. It is advisable to place away from Plasma or CCFL screen as it may affect the remote control signal.

3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power

4. Power up & all is ready to go.







TECHNICAL SPECIFICATION :

Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz
Emitting Frequency ( Broadband ) : 38 KHz & 56KHz
Receiving Distance : 8 meter
Emitting Distance : 10-20 cm
Power Consumption : < 30mA
Dimension for Receiver & Emitter : 31 (L) ×17 (W) ×13 (H) mm, 13 (L) ×8 (W) ×5. 5 (H) mm
Input AC 100-240V/ Output DC 5V : USB 5V 500mA






FREQUENTLY ASKED QUESTIONS :

1. How to locate the IR Point of the AV Equipment?
A. Set up as per the installation procedures without step one. With the help of an assistant controlling the AV equipment Remote Control, move the IR Emitter around on the window of AV equipment until signal sent is received.


2. Remote Control doesn't work after installation ?
A. Check the power status of your AV equipment
B. Check the connection of USB to AV Equipment/ Power adaptor
C. Ensure that remote control is facing the IR receiver ( Flashes red when a signal is sent )
D. Check the position of IR Emitter.
E. Place IR Receiver away from Plasma or CCFL screen as it may affect the remote control signal.
F. Contact your dealer if the situation does not improve after the above alteration.