RTV-2 Mold Making Silicone Rubber

RTV-2 Mold Making Silicone Rubber Application:
RTV-2 mold making silicone rubber is mainly applied for making various molds, such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle& lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic products, and etc.
RTV-2 mold making silicone rubber advantages: good tension and tear strength, high reproduction times and with restistance of high temperature, etc.

RTV-2 Mold Making Silicone Rubber Opearations:
RTV-2 mold making silicone rubber contains two parts: part A is liquid silicone rubber, part B is curing agent.
1. Mix both A and B parts totally by weight at the ratio of 100:2 (A to B) in a clean container. Making sure that A and B mixed evenly, otherwise the compound will be partly solidified and this will give birth to difficulties in the following operations, leading to the short life of your final molds.
2. Degas the compound by a vacuum pump about 3-5 minutes (usually no more than 10 minutes), otherwise, it will cause cross linking reaction, and no more further operations will be available.
3. Make molds in brushing way or pouring way according to the size of your products.

Any questions ,please feel free to contact Aaron:
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-15338725181
Website: www(dot)szrl(dot)net
E-MAIL: hyjf(at)szrl(dot)net
Skype : aaronxu9