QZYI-2/180 Grade Polyesterimide Aluminum Wire

The preferred size of the nominal diameter of the conductor diameter conductor shall comply with the R20 number system in GB/T321-2005.
When required for technical reasons, the intermediate size of the nominal diameter of the conductor selected by the user shall comply with the R40 number system in GB/T321-2005. See Appendix A for actual values and their tolerances.
Generally, when testing at room temperature and high temperature (when required by the user), the enameled wire shall meet the requirements specified in 13.2 and 13.3, respectively. See the relevant product standards for high temperature test temperatures.

The Celsius temperature relative to the temperature index is not the recommended enameled wire use temperature because the temperature of use is related to many factors, including the type of equipment involved.
See the requirements of the relevant product standards for refrigerant resistance.
Straight weldability is not applicable.
Thermal bonding can be found in the relevant product standards.
The dielectric loss factor can be found in the relevant product standard.
Resistance to transformer oil can be found in the relevant product standards.
See the requirements of the relevant product standards for weightlessness.
Pinhole test requirements are under consideration.
GB/T23312.1-2009/IEC60317-0-3:2008

https://*/product/aluminum-enamelled-wire/qzyi-2-180-grade-polyesterimide-enameled-aluminium-round-wire.html