QSFP 100G 1310nm 10km LC Transceiver

QSFP-100G-LR4 1310nm 10km LC Transceiver(lr4 100g) product is a 100Gb/s transceiver china module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

The central wavelengths of the 4 LAN WDM channels are 1295.56, 1300.05, 1304.58, and 1309.14 nm as members of the LAN WDM wavelength grid defined in IEEE 802.3ba. The high-performance cooled LAN WDM EA-DFB transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 10km links and are compliant to optical interface with IEEE802.3ba Clause 88 100GBASE-LR4 requirements.

The qsfp28 lr4 transceiver is designed with form factor, optical/electrical connection, and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity, and EMI interference.

Compatibility of QSFP 100G 1310nm 10km LR4 Transceiver
Cisco
Juniper
Brocade
Arista
Dell
Extreme
Mellanox
QSFP-100G-LR4-S 100GBASE-LR4 QSFP28

Technical Specification Of Q SFP 100G 1310nm 10km LC Transceiver

Absolute Maximum Ratings
QSFP-100G-LR4 has to be noted that the operation in excess of any individual absolute maximum ratings might cause permanent damage to this module.

Parameter Symbol Min Max Units Notes
Storage Temperature TS -40 85 degC
Operating Case Temperature TOP 0 70 degC
Power Supply Voltage VCC -0.5 3.6 V
Relative Humidity (non-condensation) RH 0 85 %
Damage Threshold, each Lane THd 5.5 dBm

Recommended Operating Conditions and Power Supply Requirements
Parameter Symbol Min Typical Max Units
Operating Case Temperature TOP 0 70 degC
Power Supply Voltage VCC 3.135 3.3 3.465 V
Data Rate, each Lane 25.78125 Gb/s
Control Input Voltage High 2 Vcc V
Control Input Voltage Low 0 0.8 V
Link Distance with G.652 D 0.002 10 km