Pulse Output Fiber Laser Marking Machine (M5F (Q))

Feature:
The new generation of fiber laser marking system has the revolutionary:

1. It has volume slightly, the semiconductor module has got long life (>500 thousand hours), the power consumption is low (160Q),The beam quality is high, the USB connection, supports WIN98/2000/XP and other operating system.

2. It is not influenced by bad circumstance and temperature change; May use the accumulator cell and an automobile smoke under the power cut condition and so on carries on the operation.
Before Fiber laser appeared, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time reaches 100,000 hours;

3. Fiber laser is a type of full air cooling, so it doesnÿ®t need refrigerant device, freezing water pipe or temperature controller, the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system.

4. The pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46*160*250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off the power consumption is only 160W.

Application:
Applicable materials: Metal/plastics/ Ceramics /paper/leather/ Coating glass /organic glass.
Applicable field: Craft present, Clothing leather, food & packing, electronic component ,automotive parts.

Parameter:
Power: 5W~20W (as per your requirements)

Laser length: 1060nm

Laser power: 20KHZ-80KHZ continual

Power supply: Single phase AC 220V/50HZ-60HZ

Electricity power: < 160W

Machine dimension: 570mm*270mm*200mm

Wet weight: < 22KG

Focusing spot diameter: <0.01mm

Marking area: 30mm/30mm-300mm/300mm optical

Marking speed: > 800character/s

Semiconductor life: > 500,000 hour

Marking depth: 0.01-0.2mm

Operational system: Win98/Win2000/XP

Cooling mode: Air cooling

Controlling joint: Standard USB

Accept typeface and document format: WINDOWS operating system fonts all typefaces/Font (including various countries language and writing/Bar code and so on); BMP/Belt 256 gradation images document and DXF/ and so on PCXPLT form vector graphic file.