Polypropylene Needle Felt,Polypropylene Needle Punched Felt,Polypropylene Needled Felt

Polypropylene Needle Felt

Polypropylene is a relatively low temperature fiber with quite excellent chemical resistance which finds use in specialist applications such as the chemical industry.

The fibers cannot hydrolyse, the only chemical weakness being a susceptibility to oxidising agents. Other than that they can be used almost universally provided the temperature is below 90°C.The fiber is of a low density (it floats in water) and so a given denier of fiber is much larger in diameter than the polyester equivalent. This leads to felts being quite thick, almost 50% thicker than for the same polyester weight.The fiber is very prone to static build up so the felts are often augmented by the incorporation of either conductive fibers or a conductive scrim or a combination of the two. This then helps to dissipate potential static electric discharges.

Feature
Smooth surface, more defined pore size and good air permeability
Low temperature resistance ( 88-110 ℃)
Excellent resistant to hydrolysis, acids and alkalies.
Lower fiber release, Lower density,High mechanical characteristics

Applications
Galvanic industry and Chemical industry Prefiltering solvents and acids
Prefilter to extend final filter life Final filter for noncritical filtrations
Liquid-solid sepration with strong acid and alkali conditions filter press
Air filtration under 90℃

Specification
Material Polypropylene/polypropylene scrim
Weight(g/m2) 500 550 600 650
Thickness(mm) 2.0 2.2 2.4 2.6
Air permeability(m3/m3/min) 12.6 10.8 9.6 8.4
Tensile Strength(N/5X20cm) Warp >960 >1150 >1350 >1500
Weft >1060 >1400 >1650 >1800
Tensile elongation(%) Warp <35 <35 <35 <35
Weft <55 <55 <55 <55
Working temperature(oC) Continues <90 <90 <90 <90
Instant 110 110 110 110
Anti-acid Excellent Excellent Excellent Excellent
Anti-alkali Excellent Excellent Excellent Excellent
Anti-abrasion Excellent Excellent Excellent Excellent
Finishing treatment Singeing or high temperature press