Platinum cured silicone rubber for tire mold

Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It’s mainly suitable for tire molds making .

Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade

Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.

Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original mold slowly .

Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set

Any more information , pls feel free to contact Miss Abby
office no. :0086-755-89212369
Mob:86-18938867556
Skype:Abby10182679
Email :hysb(at)szrl(dot)net
Welcome to our website www dot szrl dot net