PART TURN ELECTRICAL SERVO VALVE ACTUATOR

Split installation
Every Surpass 5 Profitron could be installed separately, no matter before or after manufactured products. The maximum distance of split installation is 3-10 meters (need to order if excess 10-1 OOO meters) .

The following environments have to adopt spilt installation


6.Frequency conversion and quick adjustment
Surpass 5 Profitron with frequency conversion control technology which can achieve quick adjustment, quick-opening and slow-closing control.
In some case, it requires valve control with quick adjustment and quick shutoff feature. Surpass 5 Profitron adopts frequency conversion control system which can achieve valve quick adjustment and quick-opening, slow-closing control under accurate positioning.



1.The fastest speed of SURPASS 5 PROFITRON series linear electric actuator is 16mm/s, 0-100mm running time is 1-7s.








2.The entire running time of
surpass 5 Profirton series
angular travel electric actuator
is 3-10s/90®

7.Profibus
Profibus Dp Bus
Profibus Dp is a type of fieldbus which applies to factory automation, power station and machine automation. Due to the simple and strong physical layer {RS-485) and several levels of service Op-VO (rapid cycling and determinate data exchange), Dp-V1 (non-cyclical accessing equipment parameters and diagnostic data), and Dp-V2 (more features), Proflbus Dp is the most suitable for the factory automation.

Surpass 5 profitron supports Profibus Dp, it has following features:
1. Support Profibus Op-VO, Dp-V1, Dp-V2
2. High speed data exchange (reach 1.5Mblt/s corresponding to about 0.3mslactuator)
3. Cable length is aboul 10Km (the length between two actuators is about 1200m).
4. About 126 devices can be attached
5. Redundancy bus topology as an alternative

To Profibus Op, basic topologies is go through RS 485 results, see chart:
Modbus RTU Bus
Modbus is a relatively simple but multifunction field-bus protocol. It provides all the service for the factory automation (e.g: simple binary information, analog quantity, device parameters or diagnose data exchange).

Surpass 5 Profitron supports Modbus RTU, it has following features:
1. High speed data exchange (reach 115Mbit/s corresponding to about 30ms/actuator)
2. Cable length Is about 10Km (the length between two actuators Is about 1200m).
3. About 247 devices can be attached
4. Redundancy bus topology as an alternative
To Modbus RTU, basic topologies are going through RS 485 results, same as Profibus Op.



8.Mobbile APP control
The user can remote control the actuator by the SURPASS mobile software/app, the app can wireless debug, operate, monitor and diagnose the actuator, even download, save and upload information from far away, brought the convenience to the user.
1.Visualization
The user can download all the parameter and diagnostic data with SURPASS app, and all the information can be: displayed on each function' s images. Such visualized data bring great convenience for the user.
2.Debugging convenient
All the data (such as turn-off moment, rotate speed) are displayed in the picture. It is easy to set the data, just touch the “save for the equipment" key to upload the setup parameter to the actuator. Finally, for security' s sake, the terminal position of the actuator must be set in the field.
3.Operation and monitoring functions
The main page shows the dynamic information of the control signal. The user not only observe the operational state, but also direct operate the actuator via the "forward motion" , "backward motion" , "stop" key on the main screen.
4. Diagnostic function
Failures will be displayed and recorded, and this makes the user easier to diagnose and troubleshoot.
5. Download, save, upload all the information
After debugging, the user can download, print or save the information for future reference. In additional, the user can upload the document to the new control unit of the actuator.







9.Scope of application

Actuator Types Symbol Valve Application

Sluice valve
Stop valve
Gate valve
Pinch valve

Regulating valve
Pinch valve
Telescopic valve
Butterfly valve with crank drive

Butterfly valve
Regulating valve
Pinch valve, Ball valve
Telescopic valve
Butterfly valve with crank drive

Butterfly valve
Regulating valve
Pinch valve, Ball valve
Telescopic valve
Butterfly valve with crank drive

2SB6…/2SJ6 Series Intelligent Electric Actuator
2SB6···/2SJ6···series electric actuator is the latest generations of intelligent electric actuator, which was developed by our company with the Research Institute of Zhejiang University. This product adopts DC drive, adaptive control, touch key technology. It has many advantages such as energy-efficient, high processing precision, anti-interference capability, simplicity of operation, light-weight, low noise and long service life. This series actuator are widely used for power plant, metallurgy industry, petroleum industry, chemical Industry, light industry, pharmacy industry, water supply, wastewater treatment plant, heating and ventilation industry and food industry.
1.2SB6…Product specifications

2SB6…Series linear electric actuator technical data
Type The shaft thrust The speed of output shaft Maximum travel
2SB6010 2SBEXC6010 2.5 1(0.6) 30
2SB6011 2SBEXC6011 4.0 1(0.6) 30
2SB6012 2SBEXC6012 6.4 1(0.6) 60
2SB6013 2SBEXC6013 10.0 1(0.6) 60
2SB6021 2SBEXC6021 16.0 1(0.6) 60/100
2SB6022 2SBEXC6022 25.0 1(0.6) 60/100

2SB6 Design structure
Product structure – humanistic manipulating page
Protection grade: lowest level is IP67
Separate installation: when installation space is at a premium, the temperature is too high, the vibration is excessive or harder to debug and test on-site, then intelligent control unit and main part can be installed separately.




R/L
Short press: for the shifting of the remote controlling mode and the site mode; the menu page turning when setting the mode
Long press: enter or exit the parameter setting mode

Local mode: the actuator operates in the forward direction
Setting mode: use for parameter alteration
Local mode: the actuator operates in the turning-off direction
Setting mode: use for parameter alteration

ENTER
Short press: use to confirm and save after modify the parameter values.
Long press: use to lock the site operation.
T Indicator light Over torque indication
B Indicator light Shortage of power indication


2SJ6… Product specifications
2SJ6…Series direct-connected angular travel electric actuators
2SJ6…Series direct-connected angle travel electric actuators technical data

Type Output torque Full travel time Mounting flange
2SJ6005
2SJEXC6005 50 25¯5 F05/F07
2SJ6010
2SJEXC6010 100 25¯5 F05/F07
2SJ6020
2SJEXC6020 200 25¯5 F05/F07
2SJ6040
2SJEXC6040 400 25¯5 F05/F07
2SJ6060
2SJEXC6060 600 25¯5 F05/F07
2SJ6100
2SJEXC6100 1000 25¯5 F05/F07



2SJ6…Series foot-mounted angle travel electric actuators

2SJ6…Series foot-mounted angle travel electric actuators technical data

Type Output torque Full travel time
2SJ6005
2SJEXC6005 50 25¯5
2SJ6010
2SJEXC6010 100 25¯5
2SJ6020
2SJEXC6020 200 25¯5
2SJ6040
2SJEXC6040 400 25¯5
2SJ6060
2SJEXC6060 600 25¯5
2SJ6100
2SJEXC6100 1000 25¯5








2SJ6… Design Structure
Product is more refined and lighter--adopt gear transmission structure
Protection grade: the lowest level is IP67, meets the DIN EN 60529 standards.
Installation approach: two installation ways: direct-connected type or foot-mounted type. Users can select from either installation way depending on actual





R/L
Short press: for the shifting of the remote controlling mode and the site mode; the menu page turning when setting the mode
Long press: enter or exit the parameter setting mode

Local mode: the actuator operates in the forward direction
Setting mode: use for parameter alteration
Local mode: the actuator operates in the turning-off direction
Setting mode: use for parameter alteration

ENTER
Short press: use to confirm and save after modify the parameter values.
Long press: use to lock the site operation.
T Indicator light Over torque indication
B Indicator light Shortage of power indication

3.2SB6…/2SJ6…Product advantages
2SB6…/2SJ6… electric actuators Vs. SKZ/SKJ, 3610 series traditional electric actuators


Items 2SB6··-/2SJp ... Series electric actuators SKZ/SKJ, 3610 Traditional electric actuators
Energy saving and eco-friendly 30%-40% Power brushless motor driven, 30% -40% less energy than similar products AC asynchronous motor, consume energy heavily.
Set up
Fool-style guiding function, easy adjustment, Liquid crystal display Digital display or none
Control precision By using Holzer detection position, the control precision can reach O 5%, and the repeatability is good. Control precision only 2.5%, bad repeatability
Function configuration
Two control mode: analog quantity and switch value. With five relay outputs. Only has one control mode, without relay output.

Valve protection Shutoff slowly, have no impact on valve, long valve' s life. Without flexible operation, have bad impact on valve and shorten the valve' s life,

Service life
Using non-contact Hall element to measure the position, extend the service life 2-3 times Using potentiometer to measure the position, shorten the service life
Defensive function With over torque, position detection fault, motor fault, electronic unit fault diagnosis function The traditional electric actuator does not have a moment of protection function
Security function Achieve to IP67 Only achieve to IP 55





2SB6…/2SJ6… electric actuators Vs. PSL/PSQ, other electric actuators


Items 2SB6··-/2SJp ... Series electric actuators PSL/PSQ and other traditional electric actuators
Energy saving and eco-friendly 30%-40% Power brushless motor driven, 30% -40% less energy than similar products AC asynchronous motor, consume energy heavily.
Set up
Fool-style guiding function, easy adjustment, Liquid crystal display Digital display or none
Load capacity High starting torque, strong overload capacity, hard load characteristics he starting torque is low, overload ability is weak, the load characteristics of soft

Control precision The control precision can reach O 5%, and the repeatability is good.
Control precision only 1%

Function configuration Two control mode: analog quantity and switch value. With five relay outputs. Only has one control mode, without relay output.
Defensive function With over torque, position detection fault, motor fault, electronic unit fault diagnosis function The traditional electric actuator does not have a moment of protection function

Service life Using non-contact Hall element to measure the position, extend the service life 2-3 times Using potentiometer to measure the position, shorten the service life






4.2SB6…/2SJ6… Electric working principles



5.Scope of application
Actuator Types
Symbol
Valve Application


Regulating valve Pinch valve
Telescopic valve
Butterfly valve with crank drive
2SB6…Series
2SB6…Series
Actuator Types
Symbol
Valve Application


Butterfly valve
Ball valve
Plug valve
Ventilation door
Louvered vent

Butterfly valve
Ball valve
Plug valve
Ventilation door
Louvered vent