Ozone generator wide voltage

NAME: WIDE VOLTAGE OZONE MACHINE
MODEL: YJ-5GQ-A
OPERATING VOLTAGE: AC90-260V/40-60HZ (IT CAN BE SUITED FOR ANY NATIONAL CIVIL VOLTAGE WITHOUT ANY VOLTAGE TRANSFORMER)
POWER: ≤120W
GAS SOURCE:DRIED AND CLEANING OXYGEN AND AIR
OZONE PRODUCTION: 90% OXYGEN FLOW FOR 3L/min,OZONE PRODUCTION≥6G/H
TEMPERATURE OF WORKING SITE: -10~45℃
HUMIDITY OF WORKING SITE: ≤85%
OVERALL SIZE:36x22.5x29.5(cm)
GROSS/NET WEIGHT: 8.8/8.0kg
PRODUCT STRUCTURE:
1.All of the shell adopt 1.2 mm iron sheet with plastic coating, excellent shape, humanely design and durable
2.Triple number numerical control panel, operating time and circulation can be freely set
3.Manual adjustable mechanical potentiometer,5%-100% ozone production can be adjusted, ozone concentration and production also can be freely adjusted in accordance with customer’s demand;
4.Oxygen or Air can be freely used under customer’s demand due it with switch of Oxygen and Air
5.Power supply cable adopts plug design
6.The high voltage of internal machine is 4600V, So it can be opened only by specialist
7.Ozone generator of the machine meet European standard, excellent safety; no high voltage on the outside surface when it is operating,
8.Strong power DC fan, so it has efficient heating dissipation, and temperature of the ozone generator will not higher 5℃ than around
9.It adopts mute Air pressure pump, shockproof and low noise
PRODUCT APPLICATION INSTRUCTION:
YJ-5GQ-A WIDE VOLTAGE OZONE MACHINE is a human ideal equipment to do water treatment and air disinfection for civil projects; The products widely have been used to do air purification from room, and to eliminate pesticides from fruits or vegetables, also medical operating room, aseptic workshop, food processing, storage room, bacteria feeding room, farming, laundry shop, hotel, restaurant, center air condition system and so on.
The equipment installation introduction:
1 step: The equipment should be placed in a place where must be dry cleaning and good ventilation, temperature will not more than 45℃
2 step: Exit of the machine should be connected well with pipe, put the pipe in the place where need to do treatment
3 step: When gas source is AIR, please use plastic pipe to connect AIR OUTPUT and AIR/OXYGEN INPUT(IT ALREADY HAS BEEN DONE BY MANUFACTURER AT FACTORY),then take the switch to indicator of AIR; When gas source is OXYGEN , then the plastic pipe should be disassembled from AIR/OXYGEN INPUT, OXYGEN pipe should be connected on the exit of AIR/OXYGEN, take the switch to the indicator of OXYGEN;
4 step: Put on power after power cable has been connected, the machine will enter state of operating which will be appeared on screen in real time
5 step: Setting working type:(numerical control)
A. Press setting button, circulation light will be flashed
B. Press time setting button to add or reduce time which should be demanded(maximum 600 minutes, minimum is 1 minute); Press the time setting button again to set time for machine will be stopped(maximum 600 minutes minimum 1 minute); Press the button triple to set data store(unlimited circulation); In the case of without operating circulation, then the number should be set for 0.
C. Press ON/OFF button to start operating the machine. Press ON/OFF button machine will be stopped during the machine is operating; Press ON/OFF button again the machine will be restarted to continue work; This apparatus has memory function. It will be worked following on the last time working data when power on again after in the case of power supply is interrupted in non normal ;
D. Alarm will be rung and number will be flashed on the screen when the setting working time is over;