OCXO 10 mhz bandpass filter

FEATURE
- Dimension 36.3 x 27.2 x 12.7 mm typical.
- SC Cut Crystal.


TYPICAL APPLICATION
-SDH/SONET , Telecommnication base station
-Test and measurement equipment
-Synthesizer , Digital switch , Reference Timing Circuit

DIMENSION





RoHS Compliant Standard



ELECTRICAL SPECIFICATION
Parameter Min. Typ. Max. Unit Test Condition & Notes
Output Frequency 　 10 　 MHz Available frequency range is from 5MHz to 40MHz.Standard
Frequencies are10,12.8,13,15.36,19.2,20,25 and 38.88MHz
Wave Form 　 Rectangular 　 　 Sine wave output is available.
Consult factory for more information
Level 　 LVTTL 　 　 　
“1”Level 2.4 2.8 　 V 　
“0”Level 　 　 0.4 　
Load 　 15 　 pF 　
Duty cycle 45 50 55 % @+1.4 V
Spurious 　 　 -60 dBc 　
Frequency Stability Ambient -5 　 5 ppb -40 oC to +85 oC,referenced to +25 oC
Refer to Freq.Stability Vs Temp. Range table..
Aging -0.5 　 0.5 ppb Per day,at time of shipment
Daily -0.5 　 0.5 ppb after 30 days
Yearly -50 　 50 ppb 　
10 years -0.3 　 0.3 ppm 　
Voltage -0.5 　 0.5 ppb ±5% Change
Warm-up -10 　 10 ppb In 10 minutes @ +25 oC,referenced to 1 hour
　 　 　 -120 　 @10Hz
Phase Noise 　 　 -135 dBc/Hz @100Hz
　 　 -145 　 @1KHz
　 　 -150 　 @10KHz
Electrical Frequency Adjustment 　 　 　 　 　
Range 　 　 -0.5 ppm Vco @ 0 V
0.5 　 　 Vco @ +5.0V
Control 0 2.5 5 V 　
Slope 　 Positive 　 　 　
Input pedance 100 　 　 KΩ 　
Input Power Voltage 4.75 5 5.25 V 3.3V Input voltage is available.Consult factory for
Control voltage and output level.
Current 　 　 850 mA @ turn on
Steady state 　 　 1.3 W @ +25 oC

Packing: 40 pcs/Box, 5 boxes/Carton,200 pcs/Carton.
FREQ. STABILITY vs. TEMP. RANGE




* O: Available △:Conditional X: Not available


Specifications subject to change without notice