Network Camera/IP Camera/web camera/mobile control/P.O.E/New

Camera type- compatible with BT.656,28.63636MHz for NTSC-28.375MHz for PAL
P.O.E (power over Ethernet)- only one UTP cable to transfer power and video signal, facile to install
Mobile surveillance- anytime, anywhere, prompt information in hand
Advanced camera setting-setting in remote through I.E friendly to user
Support DC/video driver auto Iris lens- standard C/CS mount lens
Built-in MIC- Hi-performance, sensitive MIC maximum working distance can reach 10M
Compression- MPEG4/JPEG
Resolution/frame rate- NTSC D1-720 x 480/30 CIF 360 x 240/30 Half-D1 720 x 240/30 QCIF 180 x 120/30
PAL- D1 720 x 576/25 CIF 360 x 288/25 Half-D1 720 x 288/25 QCIF 180 x 144/25
Network protocol-TCP/UDP/IP,HCP, SMTP, HTTP, NTP, DDNS, FTP, TFTP, ARP, nPn and PPPoE
Transmission format and recorded format- MPEG-4 video stream with 2 way 16/24/32/40kbps ADPCM audio
Power supply- POE/DC 12V or AC 24/DC12V
Power consumption- about 500mA (without WLAN card)
Motion detection- movement on image;digital sensor input
Controller interface-Internet Explorer 5.0 or above; mobile monitor system
Memory-2Mbyte flash ROM/8Mbyte SDRAM/32Mbyte DDR
Network-10/100 Ethernet; wireless LAN 802.11g (option, not support by POE version)
Audio- support 2 way audio and microphone on board
I/O port s- power input,RJ45 network port,video output port,audio I/O port,system reset,RS485 control port,alarm I/O port
Dimensions (L x W x H)- 160 x 70 x 80mm (without lens)
Weight- about 550g
Operating temperature- 5 to 40C
Storage temperature- 0 to 70C
Operating humidity- 10 to 80percent