NT-2018High-performance wireless barcode scanner with memory

-- Long-distant and fast transmission,
-- Data storage,
-- Scan number display,
-- Network construction, and
-- Application of Anti-jamming Frequency Hopping Technology.

NT-2018 brings convenience, comfort, high-speed and stability into your bar code scanning.

Features and Advantages
1. It could be used as a collector, memory 4M can be extended to 8M
2. Never lose data, clear warning.
3. Intelligent uploading; can choose to upload data of last scans and resume uploading from breakpoints.
4. No-messy-code programmed, data
counting, repeated code and out of
the base range warning, ID display.
5. Beeper and light indicates if the
scanner is out of the base range and
scanning will automatically switch to
storage mode.
6. Support one to one, one to many,
many to one operation; and each base can respond to up to 254 scanners.
7. The terminal communicates with the base at long distance of 150 meters indoors or 300 meters outdoors
8. 1200MA replaceable lithium battery enables 6-10 hours continuous use after full charge and avoids trouble of returning to factory for replacing battery. Base supports data transmission and battery charging.
9. Germany imported quartz scanning window; effective light penetration, scratch-proof.
10. Supports USB, PS2, RS232 and other designated interface.


Detailed Specification:

无线枪
Physical Characteristics
Dimensions: Scanner: 6.1 in. H x 3.7 in. L x 2.7 in. W/15.5 cm H x 9.5 cm L x 6.8 cm WCradle: 6.69 in. H x 4.7 in. L x 5.5 in.W/17 cm H x 12 cm L x 14 cm W
Weight: Scanner:~8.4 oz./238 g; Cradle: ~6.4 oz./183 g
Mounting Options: Cradle supports vertical or horizontal positions
Voltage & Current: (Cradle) Voltage Current (Charging / Non Charging)5 +/-10% VDC 620 mA / 70mA with external power5 +/-10% VDC 450 mA / 70mA with host power through cable12 +/-10% VDC 270 mA / 50mA with external power12 +/-10% VDC 230 mA / 50mA with host power through cable
Color: Cash Register White (shown) or Twilight Black
Performance Characteristics
Light Source: 650 nm laser diode
Scan Element Frequency: 50Hz
Decode Rate: 98 decodes per second
Battery Specifications: 900maH NiMH - (3) AAANumber of scans per full charge: 32,000+ @ 1 scan/secondCharge time: Fully discharged battery: < 3 hours viaexternal power / ~4.5 hours via host power throughcable Note: Typical daily scans are less than 4,000,which fully charges within 1 hour
Roll / Pitch / Yaw: +/- 35° / 45° / 60°
Nominal Working Distance: 5 mil (Code 39): 1.5 to 5.5 in. (3.81 to 13.97 cm)13 mil (100% UPC/EAN): 0 to 19 in. (0 to 48.25 cm)10 mil (Code 39): 0 to 14 in. (0 to 35.56 cm)20 mil (Code 39): 0 to 29 in. (0 to 73.66 cm)
Print Contrast: 25% minimum reflectance
Multi-Line Aiming Coverage: At 5 in./12.7 cm reading distance: ~ 0.5 in./1.3 cmAt 10 in./25.4 cm reading distance: ~ 1 in./2.5 cm
Motion Tolerances: Horizontal velocity: 200 in./508 cm per secondVertical velocity: 200 in./508 cm per secondAngular velocity: 200 in./508 cm per second
Decode Capability: UPC/EAN and with supplementals, Code 39, Code 39Full ASCII, Tri-optic Code 39, RSS Variants, UCC/EAN128, Code 128, Code 128 Full ASCII, Code 93, Codabar(NW1), Interleaved 2 of 5, Discrete 2 of 5 MSI, Codell,IATA, Bookland EAN, Code 32
Interfaces Supported: LS4278 cradle features on-board multiple interfacewith: RS-232C (Standard, Nixdorf, ICL and Fujitsu);IBM 468x/469x; keyboard wedge; USB (Standard,IBM SurePOS, Macintosh); laser/wand emulation. Inaddition, Synapse adaptive connectivity allows forconnectivity to all of the above plus many non-standardinterfaces.
User Environment
Operating Temperature: 32° to 122° F/0° to 50° C
Storage Temperature: -40° to 158° F/-40° to 70° C
Humidity: 5% to 95% non-condensing
Drop Specifications: Withstands multiple 5 ft./1.5 m drops to concrete# of Cradle Insertions: 250,000+ insertions
Ambient Light Immunity: Immune to normal artificial indoor and natural outdoor(direct sunlight) lighting conditions
Regulatory
Electrical Safety: UL1950, CSA C22.2 No. 950, EN60950/IEC950
Laser Safety: CDRH Class II, IEC Class 2
EMI/RFI: FCC Part 15 Class B, ICES-003 Class B, European UnionEMC Directive, Australian SMA
Accessories
Brackets: Desktop/wall-mount bracket
Power Supplies: Power supplies are available for applications that donot supply power over the host cable
Warranty
Subject to the terms of Netum’s hardware warranty statement, the NT-2018 handheld scanner products are warranted against defects in workmanshipand materials for a period of three years from the date of shipment. The LiquidPolymer Scan Element includes an unprecedented limited lifetime warranty.For the complete Netum hardware product warranty statement, go to:http://www.gzxlscan.com/warranty.