NPE 9300 GPRS industrial embedded computer.

Device from the NPE series is the industrial computer, equipped with the efficient processor RISC ARM9 with preinstalled in the Flash memory operating system Linux ver. 2.6. The computer is equipped with the Ethernet 10/100 BaseT port, two RS-232 ports, RS-485 port, 8 binary inputs and SD cards reader. The NPE computer cover is especially adapted to the installation in difficult industrial conditions on the DIN bus, and assures quick and comfortable installation in the target location. The relatively small dimensions and the IP21 standard cover, no moving parts (fans, discs) assure the failure-free operation in the industrial objects as well as in various cabinets. Moreover, the NPE computer may be optionally produced in versions with enhanced operational temperature range (-25°C¸ 70°C).

Specification: */9300-gprs-p-5483.html

Computers from the NPE family is the series of industrial built-in computers, characterized by: complete, ready platform (hardware + installed Linux operating system + freeware tools and programming libraries for C/C++), adapted to the operation in difficult environment conditions (temperature range even form -20°C to 70°C) and high operational reliability.

More informations about NPE Platform: */embedded-computers-platform-c-834_1933_107.html

Specification

CPU - ARM9 32-bit RISC CPU, 180 MHz, 200 MIPS

Memory on board - 64 MB SDRAM (max memory size 128 MB)

Flash memory - 1GB

Card reader - 1 x SD

System - Operating system - Linux v 2.6
RTC clock - RTC, SRAM 240 bajtów, Watch Dog Timer

On Board LAN
1 x Ethernet 10/100 Mbps (RJ45 connector); 1.5 KV magnetic isolation

Interface RS-232 - 2 x RS-232, built in protection 15 KV ESD

Interface RS-485 - 1 x RS-485, built in protection 15 KV ESD; Data bits: 5, 6, 7, 8, Stop bits: 1, 1.5, 2; Parity: None, Even, Odd, Space, Mark, Speed: 50 bps to 921.6 Kbps

LED signalling - system x 1, user x 1

Ethernet signalling - LED link, LED 100Mbit (integrated with RJ45 connector)

Selector - 1 x Switch (access from the front panel)

GPIO - 8 x DI

Diagnostic socket - 1x 6 pin socket

Direct current - 12 ~ 36 V (optionally 12 ~ 48 Vdc – telecommunication range)

Power draft - 7W max

Dimensions - (width x depth x height) 35 x 120 x 101 mm

Weight - 300g

Casing - ABS, DIN mounting

Working parameters - Operation temperature: -10 ~ 60°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 75°C (for NPE-9100-E).

Storage parameters - Storage temperature: -20 ~ 80°C; Wetness: 5 ~ 95% RH (without condensation); Optionally: -40 to 85° C (for NPE-9100-E)

Modem GSM/GPRS - Waveband GSM/GPRS 900/1800/1900 MHz; GPRS Class 10 max. 85.6 kbps (downlink); Compatible with GSM phase 2/2+; - Class 4 (2W @ 900 MHz); - Class 1 (1W @1800/1900 MHz); Antenna connector: SMA (female)

Aditional power draft - 5W max

Aditional weight - 50g