Mbus 10 converter M-Bus master to RS 232

MBus 10 converter is a transparent converter from RS232 to MBus interface. On MBus side it works as MBus master and enable to connect maximum 10 standard MBus receivers (slaves). It can be used with all devices equipped with MBus interface like: heating energy meters, electric energy meters, data recorders and many others with MBus interface. MBus 10 can successfully replace PW3 Relay M-Bus level converter or any other M-Bus master converter.

http://www.gprs-controllers.com/mbus-10-p-3150.html

SPECIFICATION

Construction - RS-232/MBus Converter; Ethernet option

Interface - RS-232; Ethernet option

Connector - Screw Terminal Block (3 pin)

Interface - MBus

Port number - 1

Maximum baudrate - 300 do 19200 baud/sec

Connector - Screw Terminal Block (5 pin)

Maximum M-Bus slave number - 10

Hardware Data Direction Control - No

Automatic Data Direction Control - Yes

Opto Isolation:
M-Bus - Power Supply - No

M-Bus - RS 232 - 100V AC/DC

Power Supply - RS 232 - 100V AC/DC

Surge Protection / Over Voltage Protection

M-Bus Interface - 43V 600W/1ms

Data Transmission - 2xLED (Tx-Yellow, Rx-Green)

Power Supply - LED (Red)

Power Supply Conditions
Voltage - (+12 - +25)Vdc;
Current - 0.25 A max

Operating Temperature - 0...+40°C

Dimensions (Depth x Width x Height) - 60x34x90mm

Weight - 0,1kg