Leaching agitation tank

Introduction
In the gold cyaniding process, leaching agitation tank is applied to leach and carbon-absorb ore pulps whose fineness is -200 meshes and whose density is less than 45%.


Features
The machine is developed and manufactured on the basis of imported American technology.
Ore pulps are driven to flow stably and mixed uniformly with less energy consumption.
Impellers are covered with rubber, it has low speed and long service life.
Air is fed in tank through multiple holes.

Application
In the gold cyaniding process, the machine is applied to leach and carbon-absorb ore pulps whose fineness is -200 meshes and whose density is less than 45%. Under similar circumstance, it is also applied to agitation and leaching in metallurgy, chemical and light industry.

Working principle
With dual impellers rotating and agitating, ore pulps move downward and then diffuse along damping plate. Air is fed in tank from the lower end of shaft, and blended with ore pulps to form uniform suspending mixed liquid.


Technical parameters
Model Specs of tank D×H(mm) Effective volume(m³) Speed of impeller(r.p.m) D of impeller (mm) Motor model Motor power(kw) Cycloid planetary reducer model W of tank(kg) G.W(kg)
SJ2.0×2.5 2000×2500 6 52 909 XLD-4 2.2 XLD2.2-4-29 1609 2144
SJ2.5×3.15 2500×3150 13.14 935 2241.36 3095
SJ3.0×3.0 3000×3000 18 40.85 1130 XLD4-4 4 XLD4-5-35 3391 4583
SJ3×3.15 3000×3150 18.93 43 XLD-4 2801.12 4160.6
SJ3×3.5 3000×3500 21 XLD-4-5 2974.69 4334.6
SJ3.15×3.55 3150×3550 24 1260 XLD-4-5-35 3330.15 4322.8
SJ3.5×3.5 3500×3500 30 52 1310 XLD5.5-5.29 5.5 XLD5.5-5-29 4285.6 5025
SJ3.5×4 3500×4000 32.7 4630.6 5429
SJ3.55×4.0 3550×4000 33.6 43 XLD4-5-35 4 XLD4-5-35 4059.6 5025
SJ3.7×4.2 3700×4200 38.4 42 XLD4-5-43 XLD4-5-43 5057.76 6153
SJ4.0×4.5 4000×4500 48 35 1750 XLD7.5-7-43 7.5 XLD7.5-7-43 6105.17 7569
SJ4.5×5.0 4500×5000 71.57 1750 XLD7.5-7-43 7505.78 10864
SJ5.0×5.6 5000×5600 98 31 2046 XLD11-8-47 11 XLD11-8-47 10482.4 14291
SJ5.5×6.0 5500×6000 112 2100 14209 18745
SJ7.0×7.5 7000×7500 245.4 21 2400 XLD22-10-47 22 XLD22-10-47 22090.22 29030
SJ7.5×8.0 7500×8000 268.6 2900 Y225S-8 18.5 24594.36 32796
SJ8.0×8.5 8000×8500 342 16.4 3200 Y250M-8 30 XLD22-11-59 33488.82 42467.3
SJ8.5×9.0 8500×9000 395 18.5 3300 Y250-8 36695.5 46623
http://www.ytxinhai.com/en/
http://www.xinhaimining.com/en/