LDPE LD2426K Tech

LDPE LD2426K Tech

FEATURES of Innoplus Idpe:
High-pressure tubular process, a technology licensed by LyondellBasell.
Well balance property of an optical property, mechanical property and process ability.

APP:
General purpose film, shrink film, zip bag and food packaging film.
Liner cap, drinking water cap and vegetable oil cap.

Properties InnoPlus LD2426K Units Test Methods
Physical Properties (Based on pellets and press-molded sheet)
Melt Flow Rate at 190oC, 2.16 kg. 4.0 g/10 min ISO 1133
Density 0.924 g/cm3 ISO 1183
Melting Temperature 110 oC ISO 11357
Vicat Softening Point 93 oC ASTM D1525
Tensile strength at Yield 11 N/mm2 ISO 527
Tensile Modulus 260 N/mm2 ISO 527
Film Properties* (Based on blown film)
Max. Tensile Strength (MD/TD) 20 / 18 MPa ISO 527
Ultimate Elongation (MD/TD) 500 / 630 % ISO 527
Dart Drop Impact 120 g ASTM D1709
Haze 8 % ASTM D1003
Gloss (20®) 80 - ASTM D2457
* film properties obtained from 50 microns film which was blown film extruded at blow up ratio 2.5
STORAGE

Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.
Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.